Gap between boards in the corner of my sub |
Post Reply |
Author | |
Piato75
Registered User Joined: 16 May 2022 Location: France Status: Offline Points: 15 |
Post Options
Thanks(0)
Posted: 03 May 2023 at 11:48am |
Hi,
I have an issue regarding some of my subs Here is a video showing the problem : https://youtube.com/shorts/vbTRw0NVkl4 There is a small gap between boards above the screw, it can be seen in the video. What is the best way to fix that ? Should I nail it with a nail gun ? Is it bad or can it happen ? As the construction looks serious
|
|
cravings
Old Croc Joined: 30 January 2007 Location: Ireland Status: Offline Points: 7442 |
Post Options
Thanks(0)
|
it can happen. pour or brush a little pva or some other wood glue into the gap, and if you have a nail gun, use that, if you don't, drill and put a new screw in. will be fine.
|
|
snowflake
Old Croc Joined: 29 December 2004 Location: Bristol Status: Offline Points: 3122 |
Post Options
Thanks(0)
|
doesn't matter too much where it is. tip it up and then get some glue in the gap so that it will run down to the end of the split. then clamp and put some more screws in.
maybe put a screw in to stop it spreading before you lever it apart to get glue in. |
|
Piato75
Registered User Joined: 16 May 2022 Location: France Status: Offline Points: 15 |
Post Options
Thanks(0)
|
Alright, I'll try that, thanks for your answer !
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |