X1 question

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello
I have a Beyma 18 G550 in a tiny reflex box and I was wondering if it would perform very well in an X1. Here are the T/S figures.
fs 36hz
re 5.3ohms
qms 8.88
qes 0.39
qts 0.37
vas 210L
cms 103um/n
rms 5.5kg/s
sd 0.1200m2
xmax 9mm
vd 1075cm2
le 1.4mh
900W rms
frequency range 25-1500hz
4.5 inch voice coil
10kg magnet
I'm sure it won't be as good as a Void V1000, but until I can afford the Void, is it worth bolting the Beyma in it's place?
If not, does anyone have a good design that would suit this driver? 
Thanks

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
subfan Members Profile Send Private Message Find Members Posts Add to Buddy List Registered User Joined: 27 April 2004 Location: United Kingdom Status: Offline Points: 14	Post Options Post Reply Quote subfan Report Post Thanks(0) Quote Reply Topic: X1 question Posted: 03 February 2005 at 2:13am
	Hello I have a Beyma 18 G550 in a tiny reflex box and I was wondering if it would perform very well in an X1. Here are the T/S figures. fs 36hz re 5.3ohms qms 8.88 qes 0.39 qts 0.37 vas 210L cms 103um/n rms 5.5kg/s sd 0.1200m2 xmax 9mm vd 1075cm2 le 1.4mh 900W rms frequency range 25-1500hz 4.5 inch voice coil 10kg magnet I'm sure it won't be as good as a Void V1000, but until I can afford the Void, is it worth bolting the Beyma in it's place? If not, does anyone have a good design that would suit this driver? Thanks