Couple more questions. |
Post Reply |
Author | |
Richard Hart
Young Croc Joined: 08 November 2005 Location: Leeds Status: Offline Points: 637 |
Post Options
Thanks(0)
Posted: 05 September 2006 at 8:42pm |
Hello. The plans quote a dispersion of 40X25, but I see that the P Audio horn is 60X40, is this right? Also, I've got a couple of B&C 12 PLB 76 drivers. How will they perform in an MT121? Many thanks. Rich |
|
norty303
Old Croc Joined: 18 August 2004 Location: Eastbourne Status: Offline Points: 8806 |
Post Options
Thanks(0)
|
The dispersion limitation will be wholly dependant on the horn you choose for the compression driver.
The horn for the 12" is not capable of controlling the dispersion effectively at the frequencies it plays
|
|
My laser stuff: Frikkin Lasers
|
|
james folkes
Old Croc Joined: 08 January 2005 Location: United Kingdom Status: Offline Points: 3064 |
Post Options
Thanks(0)
|
is that what you've found norty? perhaps it's because they're odd-ball 10" jobs, but i find the upper end of the cone's output seems to be governed by the first part of the flare on my cabs. the dispersion is most definitely not 60 degrees up at the 1k region, with beaming starting to get really noticeable above that point. you can either array them so you get comb filtering or gaps in the response, the choice is yours! james. |
|
mardy hippy.
|
|
Richard Hart
Young Croc Joined: 08 November 2005 Location: Leeds Status: Offline Points: 637 |
Post Options
Thanks(0)
|
I think you've missed the point norty.
I understand that it's largely down to the comp, and I'm asking about the reccomended P audio horn on the plan. The horn is 60X40, larger than the quoted dispersion of the box. Is this down to the horn being changed from when the box was changed from PD/Beyema to P audio, or is it because of the horn's behaviour abouve a certain frequency etc...
Many thanks. Rich
Edit: Can anybody comment on the B&C? Edited by Rich - 06 September 2006 at 2:22pm |
|
ceharden
The 10,000 Points Club Joined: 05 June 2005 Location: Southampton Status: Offline Points: 11776 |
Post Options
Thanks(0)
|
That B&C isn't really a horn driver. 12PE32 or 12MH32 would
be much better. Will work (make a fair amount of noise) obviously
but the response/efficiency might not be as good as the specc'ed
drivers.
|
|
Richard Hart
Young Croc Joined: 08 November 2005 Location: Leeds Status: Offline Points: 637 |
Post Options
Thanks(0)
|
Spot on, cheers Chris.
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |