MT121 Drivers... |
Post Reply | Page <1 8910 |
Author | |
bitSmasher
Old Croc Joined: 23 June 2012 Location: Melbourne Status: Offline Points: 2295 |
Post Options
Thanks(0)
|
I believe the 12" Black Widow had similar enough TS specs to match the SN12MB, since they're so cheap in the USA it'd be worth looking in to
|
|
UpComingSound
Registered User Joined: 21 June 2006 Location: United States Status: Offline Points: 393 |
Post Options
Thanks(0)
|
I purchase the celestion TF1225E they sound pretty good didnt put to much power thru them yet but sound pretty good, for the price
|
|
DJ123
Registered User Joined: 02 March 2010 Location: UK Status: Offline Points: 60 |
Post Options
Thanks(0)
|
will the B&C 12NDL88 work good in this cabinet ?
|
|
bass*en*mass
Old Croc Joined: 03 September 2009 Location: "unknown" Status: Offline Points: 4009 |
Post Options
Thanks(0)
|
^ not really imo.. you want a proper mid driver in such cabs like b&c pe32 for example..
|
|
_Natty_
Young Croc Joined: 01 April 2007 Status: Offline Points: 664 |
Post Options
Thanks(0)
|
13 pe32 is almost out of stock and b&c would leave it... they suggest me 12mh32 but sims give me back shitty spl graph...what spec we have to watch to for a proper mid? What is the first thing to mods for adapt a project like that? Horns mouthaybe?
|
|
cravings
Old Croc Joined: 30 January 2007 Location: Ireland Status: Online Points: 7442 |
Post Options
Thanks(0)
|
FAQ in the main site has a good bit about drivers for midrange horns. And the mt12 horn was designed originally for the pd123er, so that's a starting point for choosing drivers for it.
|
|
Risc_Terilia
Young Croc Joined: 15 December 2007 Status: Offline Points: 699 |
Post Options
Thanks(0)
|
I was looking at the Beyma 12p80nd for my cabs. They have an additional 6" horn between the 12 and a 1 which I crossover at 500hz. I've realised that this Beyma driver would be pretty wasted in this application so I'm wondering what a good driver for an MT121 12 horn would be if I'm only running that horn 160 - 500 hz. I'm after high efficiency and power handling - don't mind spending a bit of money on them.
Cheers Edit: B&C 12FW76 looks good: 100db sensitivity and still high in my pass band, 500w, BL 26 JUST about fits in the chamber.
Edited by Risc_Terilia - 08 February 2018 at 12:54pm |
|
Risc_Terilia
Young Croc Joined: 15 December 2007 Status: Offline Points: 699 |
Post Options
Thanks(0)
|
Got a pair of 12p80nds, rrallr excited to see how they sound.
|
|
sushi
Registered User Joined: 27 March 2012 Location: Milan Status: Offline Points: 90 |
Post Options
Thanks(0)
|
Hello! Me and my workmate just built a pair MT121 (original two section mid horn, not TDA's) now we are looking for suited loudspeakers to fit in. I've already got 2 brand new beyma 12MI100 i would definitely like to try for the mids.. anyone has heard them in this kind of cabs?
For the high band i was looking for a horn with low cutoff, since i read from other forum members this horn design has to be crossed below 1khz. I saw the beyma TD-365 horn (800hz cutoff) and the CD-1114F1E that look fine on paper but never heard them. What do you think about it? Any advice welcome! Cheers |
|
Post Reply | Page <1 8910 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |