Speakerplans.com Homepage
Forum Home Forum Home > Plans > Plan Requests
  New Posts New Posts RSS Feed - help Beyma mid/high speakers
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

help Beyma mid/high speakers

 Post Reply Post Reply
Author
Message
gruka View Drop Down
New Member
New Member


Joined: 25 March 2011
Location: Africa
Status: Offline
Points: 8
Post Options Post Options   Thanks (0) Thanks(0)   Quote gruka Quote  Post ReplyReply Direct Link To This Post Topic: help Beyma mid/high speakers
    Posted: 16 October 2012 at 7:43pm
May someone help i have bought the 4  beyma 15"MI 100 mid low spkrs with 2" beyma CP 800 Ti together TD 400 horn.May someone help and suggest for me the best trapezoid  mid/high enclosure design for two 15" inch with 2" inch driver on the centre mounted on the TD 400 horn. I would like to use for touring and would like to get more vocals for live performance.
 
I more satisfied with the bass am getting out of the four SB18 cabs loaded with 18p1200Nd driven by 4  synq PE 2400 at Bridge mode.
Back to Top
t.geessounds View Drop Down
Young Croc
Young Croc
Avatar

Joined: 10 May 2010
Location: US... New york
Status: Offline
Points: 908
Post Options Post Options   Thanks (0) Thanks(0)   Quote t.geessounds Quote  Post ReplyReply Direct Link To This Post Posted: 16 October 2012 at 9:59pm
15 mids + 2" best go for bassreflex something like the x15
Back to Top
Peter Jan View Drop Down
Young Croc
Young Croc
Avatar

Joined: 16 December 2008
Location: Belgium
Status: Offline
Points: 1019
Post Options Post Options   Thanks (0) Thanks(0)   Quote Peter Jan Quote  Post ReplyReply Direct Link To This Post Posted: 16 October 2012 at 10:02pm
A bit of a "special" speaker this 15MI100. Efficient (light cone), but not much life under 100Hz.
Two speakers in a ~100 liter cabinet, BR tuned at about 80Hz and a 24dB/oct highpass at 100Hz would be my starting point. A 400-500 watt amp @ 4 Ohm, nicely limited at half of that, is about as much as they can take, to keep Xmax within spec.


Edited by Peter Jan - 16 October 2012 at 10:20pm
Back to Top
gruka View Drop Down
New Member
New Member


Joined: 25 March 2011
Location: Africa
Status: Offline
Points: 8
Post Options Post Options   Thanks (0) Thanks(0)   Quote gruka Quote  Post ReplyReply Direct Link To This Post Posted: 17 October 2012 at 5:54am
Just a reminder i would like to use them in a BI-amp three way system usuing dBx PA+ loudspeaker management system
Back to Top
thepersonunknown View Drop Down
Old Croc
Old Croc
Avatar

Joined: 25 November 2009
Location: Madrid
Status: Offline
Points: 1628
Post Options Post Options   Thanks (0) Thanks(0)   Quote thepersonunknown Quote  Post ReplyReply Direct Link To This Post Posted: 09 November 2012 at 9:21pm
Originally posted by Peter Jan Peter Jan wrote:

A bit of a "special" speaker this 15MI100. Efficient (light cone), but not much life under 100Hz.
Two speakers in a ~100 liter cabinet, BR tuned at about 80Hz and a 24dB/oct highpass at 100Hz would be my starting point. A 400-500 watt amp @ 4 Ohm, nicely limited at half of that, is about as much as they can take, to keep Xmax within spec.


i never did understand the 15mi100. swear by the 10mi100/250 in many cases and als the 12, but i have never seen a practical use for the 15mi100. it seems to be a 15inch mid driver with practicaly non of the qualities of a mid driver and even less of thoes found in a 15.
They keep telling me life is short, but its the longest thing ive ever done!!!
Back to Top
 Post Reply Post Reply

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.06
Copyright ©2001-2023 Web Wiz Ltd.

This page was generated in 0.141 seconds.