Boominator MINI (development thread) |
Post Reply | Page <1 100101102 |
Author | |
puzo
Registered User Joined: 06 December 2017 Location: bristol Status: Offline Points: 15 |
Post Options
Thanks(0)
|
boominator digest downloaded and tonights read, thanks for that. I actualy came across an accusafe mini v2 micro wiring guide that explained it, it was tagged as 'boominator micro cartoon' and didnt get picked up with google searches. I got a TPA2020 2 x 15w from wondom. I have all the bits for the sp-60 micro version now, just waiting on a circle jig and a 33mm hole saw, so thiknk i'm gona build it anyhow. |
|
puzo
Registered User Joined: 06 December 2017 Location: bristol Status: Offline Points: 15 |
Post Options
Thanks(0)
|
How about the router bits for the baffel, any links for R6 round over bits or the 4-4.5mm chamfer bits in 1/4" shank thanks
|
|
Aterren
Registered User Joined: 14 July 2013 Status: Offline Points: 151 |
Post Options
Thanks(0)
|
Most any wood working shop should be able to help there. Try to get close but if you can't then accept what you can. I'd have to go look but there was a discussion about the round over and Saturnus specifically recommended against the chamfer I made. I don't remember the exact details.
|
|
Aterren
Registered User Joined: 14 July 2013 Status: Offline Points: 151 |
Post Options
Thanks(0)
|
Also, the 45 chamfer length is driven by how deep you cut so it is easy to change the length of the chamfer.
|
|
Gridgway
New Member Joined: 30 March 2021 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
I hope it's ok to post this question here. I have dug out all the components I assembled for my Boominator mini build. This includes a cAMP from Canopy Sounds in Denmark. I have no instructions for the amp and the connectors are not marked. The Canopy Sounds website is defunct sadly. Does anyone have a schematic for the connectors at all by any chance? Cheers!
|
|
Aterren
Registered User Joined: 14 July 2013 Status: Offline Points: 151 |
Post Options
Thanks(0)
|
You might find what you are looking for here:
|
|
Gridgway
New Member Joined: 30 March 2021 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Fabulous. Not sure why I couldn't find that. Much appreciated, thanks!
|
|
Aterren
Registered User Joined: 14 July 2013 Status: Offline Points: 151 |
Post Options
Thanks(0)
|
Any time.
Also, if anyone else is looking to build a mini and is looking for parts just let me know. I'm trying to clean house a bit and have NS6 drivers and a built up main cabinet. I posted some photos under the boominator thread on the DIY Audio site.
|
|
Gridgway
New Member Joined: 30 March 2021 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Well. I'm still not much further on, although I did get the amp to work!
I'm looking to start the woodwork now, but would be interested if anyone has or knows of the location of any construction pictures. I am particularly interested in where the wiring goes and how the central compartment is made to have access to it. In a picture I have with dimensions, showing an overall external width of 450mm, the central compartment is only 26mm wide (=450 - 200x2 - 6x4) which seems awfully narrow for the electronics and battery. Also I assume there is some form of entrance into the central compartment with a cover to access the electronics. Cheers Graham
|
|
uzip498
Registered User Joined: 31 August 2015 Status: Offline Points: 27 |
Post Options
Thanks(0)
|
Hi, If anyone's interested in purchasing all the parts to make the original boominator mini - Aura NS6 version please let me know. Step by step construction manual included. All parts are brand new and have never been used.
Parts: 4x Aura NS6 woofers 4x Dayton tweeters 2x high quality crossover components 1x Accusafe Maxamp20 amplifier - specifically designed for the boominator mini 1x Sure Wondom - 11.1v 3S battery cell holder with built in charge and protection circuitry etc. Batteries not included. 1x smart battery charger Penn Elcom brand: 1x recessed dish, 2x side handles & 4 X corner protectors Free parts- 10k volume control pot with knob, on/off switches, aux input jack, charging input jack & USB phone/accessory charger Selling as a complete package. Shipping not included. Not looking to make a profit I just want to get back some of the money I've invested in purchasing the parts. Reasonable offers only. Cheers Location- Australia Edited by uzip498 - 11 March 2022 at 1:01pm |
|
Gridgway
New Member Joined: 30 March 2021 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Hi I'm interested. Can't see a price also there's shipping to the UK where I am.
If that works, first dibs! Cheers Graham
|
|
caliban1
New Member Joined: 26 October 2022 Status: Offline Points: 1 |
Post Options
Thanks(0)
|
Hi uzip. I'm interested in your parts if you still have them and I'm in Australia. I'd PM but I don't have access yet. Thanks.
|
|
Post Reply | Page <1 100101102 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |