QTX HZ2/Chauvet Hurrican Haze 2 - No heat

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Ok, so one of my QTX hazers has stopped heating, and just spits fluid.

The LED's come on blue to say that it's ready to fog, and it does respond to the controller (it doesn't normally when warming up)

I'm thinking this may be a thermostat problem rather than the heater block itself.

Does this sound like a reasonable assumption?

What should I check to see if it is the thermostat? Should they be open or closed normally?

Also, assuming I might need to replace something, where is the best place for Chauvet/QTX spares?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
norty303 Members Profile Send Private Message Find Members Posts Add to Buddy List Old Croc Joined: 18 August 2004 Location: Eastbourne Status: Offline Points: 8806	Post Options Post Reply Quote norty303 Report Post Thanks(0) Quote Reply Topic: QTX HZ2/Chauvet Hurrican Haze 2 - No heat Posted: 07 April 2013 at 5:09pm
	Ok, so one of my QTX hazers has stopped heating, and just spits fluid. The LED's come on blue to say that it's ready to fog, and it does respond to the controller (it doesn't normally when warming up) I'm thinking this may be a thermostat problem rather than the heater block itself. Does this sound like a reasonable assumption? What should I check to see if it is the thermostat? Should they be open or closed normally? Also, assuming I might need to replace something, where is the best place for Chauvet/QTX spares?
	My laser stuff: Frikkin Lasers