JL Audio HX series... |
Post Reply |
Author | |
DJ-Dulux
Registered User Joined: 24 August 2009 Location: Kenilworth, UK Status: Offline Points: 378 |
Post Options
Thanks(0)
Posted: 19 June 2016 at 8:25am |
Anyone tried the jl audio amps, mainly the HX series 1x160w and 4x50w at 4 ohm. Power output quoted at 12.5v supply and 2 ohm stable for a bit more power?
IP6# rated so ideal for boombox and resonable crossovers built in. Looking at the hx300 to run 2 Cubo 12 and maybe 4 when i build more..... Thanks, Dupe... |
|
Dupe...
|
|
Ganon
Registered User Joined: 07 May 2014 Location: Denmark Status: Offline Points: 114 |
Post Options
Thanks(0)
|
You get more power out of the Pioneer GM-D8604 and it dosn't cost alot more.
If you want to go smaller, the Bassface 4.2 should do i realy good job and cost about half of the hx. |
|
DJ-Dulux
Registered User Joined: 24 August 2009 Location: Kenilworth, UK Status: Offline Points: 378 |
Post Options
Thanks(0)
|
Thanks ganon, anyone know what power the pioneer does at12.#v, all the specs are at 14.4v i guess.....
Dupe... Edited by DJ-Dulux - 20 June 2016 at 6:52am |
|
Dupe...
|
|
Ganon
Registered User Joined: 07 May 2014 Location: Denmark Status: Offline Points: 114 |
Post Options
Thanks(0)
|
What ive heard, it's about 4A at a 2.1 setup. :)
|
|
DJ-Dulux
Registered User Joined: 24 August 2009 Location: Kenilworth, UK Status: Offline Points: 378 |
Post Options
Thanks(0)
|
Sorry, I meant output power?
Dupe... |
|
Dupe...
|
|
Ganon
Registered User Joined: 07 May 2014 Location: Denmark Status: Offline Points: 114 |
Post Options
Thanks(0)
|
ohh, don't know the output at 12v.
But i can say it can play loud at 12v, used it on two Cubo 15 and EV sx200, and now it's powering the sx's and a cubo kick. |
|
DJ-Dulux
Registered User Joined: 24 August 2009 Location: Kenilworth, UK Status: Offline Points: 378 |
Post Options
Thanks(0)
|
Well I picked up a MX300 / 1 (HX seems to be no longer available), nominally 300W at 2ohm. Interesting feature is that its IPX6 rated so ideal for boombox use.
But at 12.5V should do, 1 * 250W at 2 ohm, 1 * 160W at 4 ohm so 80W to each of my Cubo12s. I have only measured quiescent current so far, 0.69A at 12.8V and less than 0.1A in standby. I has subsonic and LP filters and remote volume so should be able to integrate it into the rest of my system without too many headaches. Will publish further info when I measure it.... Dupe... |
|
Dupe...
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |