Volt Studio Monitor Build |
Post Reply | Page <12 |
Author | |
jbl_man
Moderator Group Joined: 12 January 2005 Location: London. Status: Offline Points: 11155 |
Post Options
Thanks(0)
|
A small spacer-washer behind the grills at each fixing screw should do the trick? Might only need 2 or 3 mm?
|
|
Be seeing you.
|
|
Thady Trá
New Member Joined: 12 September 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Could we get some cabinet dimensions?
|
|
vertx
Young Croc Joined: 14 March 2012 Location: Sydney Status: Offline Points: 578 |
Post Options
Thanks(0)
|
Cut list for 15mm ply: Top & Bottom 4x 254mm wide, 298mm deep Sides 4x 270mm high, 298mm deep
Back & Front 4 x 224mm wide, 270mm high Edited by vertx - 12 September 2017 at 12:49pm |
|
Thady Trá
New Member Joined: 12 September 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Thank you so much! And when you say 4x do you mean 4 pieces like..
|
|
DMorison
Old Croc Joined: 14 March 2007 Location: Aberdeen Status: Offline Points: 1649 |
Post Options
Thanks(0)
|
The cut list is for a pair of cabinets.
|
|
Thady Trá
New Member Joined: 12 September 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
How big are the holes on front and back?
|
|
Thady Trá
New Member Joined: 12 September 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
And what tweeters are they? Sorry if I'm asking too many questions!
|
|
vertx
Young Croc Joined: 14 March 2012 Location: Sydney Status: Offline Points: 578 |
Post Options
Thanks(0)
|
Have a look at the website it has all the details you will need
http://www.voltloudspeakers.co.uk/loudspeakers/cx2201/ |
|
www.instagram.com/translate.sound
|
|
vertx
Young Croc Joined: 14 March 2012 Location: Sydney Status: Offline Points: 578 |
Post Options
Thanks(0)
|
I've recently bought a calibrated mic and tuned these for the studio.
I've measured each speaker separately and EQ'd flat as possible. Below is the averaged response of both the left + right speakers after EQ, with Psychoacoustic filtering applied: Looks and sounds quite good. But when I turn the mic to the centre and measure both speakers at the same time, it looks different to the averaged response of the seperate left and right channels post EQ. Would this be due to comb filtering or should I be raising at 10,000 ? |
|
www.instagram.com/translate.sound
|
|
markie
Old Croc Joined: 31 October 2005 Location: Sunny Liskeard. Status: Offline Points: 4570 |
Post Options
Thanks(0)
|
Here's a couple of pics of mine. Just chucked in in a couple of old orange boxes but they seem to work OK.
|
|
If it's got wheels or tits it's gonna cost a fortune
|
|
Post Reply | Page <12 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |