|
MT121 revisited, revised |
Post Reply 
|
Page <1234> |
| Author | |||
UpComingSound 
Registered User 
Joined: 21 June 2006 Location: United States Status: Offline Points: 393 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 05 January 2013 at 4:35pm |
||
|
If any one can help me out, question I just purchase the B&C 12pe32 for mt 121 and am using the ashley protea 4.8sp for crossover what should i set the cross over settings at ? HPF freq and LPF freq right now I have the HPF at 150 and LPF at 2000 is that a good xover setting?
|
|||
 |
|||
|
LjudLahger
Young Croc 
Joined: 31 July 2008 Location: Sweden Status: Offline Points: 836 |
Post Options
Thanks(0)
Quote Reply
Posted: 04 January 2013 at 3:46pm |
||
|
Nice work!
|
|||
|
|||
|
UpComingSound
Registered User
Joined: 21 June 2006 Location: United States Status: Offline Points: 393 |
Post Options
Thanks(0)
Quote Reply
Posted: 04 January 2013 at 3:39pm |
||
|
If any one can help me out, question I just purchase the B&C 12pe32 for mt121 and am using the ashley protea 4.8sp for crossover what should i set the cross over settings at ? HPF freq and LPF freq right now I have the HPF at 150 and LPF at 2000
|
|||
|
|||
|
pfly
Old Croc 
Joined: 25 October 2007 Location: Helsinki, Fin Status: Offline Points: 2828 |
Post Options
Thanks(0)
Quote Reply
Posted: 28 December 2012 at 12:09pm |
||
This comes a bit late apparently: Really, differences of few cubic cm and millimetres here and there won't really make this that different to the original Rog Mogale MT122/MT121, everything said about the original applies for this redesign also, the point of my redesign was to just make it easier to build. |
|||
|
|||
|
pfly
Old Croc
Joined: 25 October 2007 Location: Helsinki, Fin Status: Offline Points: 2828 |
Post Options
Thanks(0)
Quote Reply
Posted: 28 December 2012 at 11:33am |
||
|
the .ZIP file should have all dimensions needed in JPEG format. I don't have cutlist, that you need to work out yourself.
Edited by pfly - 28 December 2012 at 11:35am |
|||
|
|||
|
fat_brstd
Old Croc
Joined: 23 August 2008 Location: Melbourne, OZ Status: Offline Points: 2076 |
Post Options
Thanks(0)
Quote Reply
Posted: 28 December 2012 at 10:47am |
||
|
I would like to build some of these over summer but dont really want to have to work out how sketch up works so was wondering if anyone had a pdf of the designs and maybe a cut list so I can start working out how many sheets of ply im going to need.
|
|||
|
Melbournes Rootical Warrior Roots - Dub - Steppers facebook page |
|||
|
|||
|
vibez
Registered User
Joined: 21 January 2010 Location: wolverhampton Status: Offline Points: 316 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 March 2012 at 11:31am |
||
|
I have mt122's and mt121's and have tried many drivers in them but have been most happy with bms drivers, i had to alter chamber size slightly from the original design that is on this site but results were very good in my opinion. I haven't had a close look at these new dimensions but would advise anyone building mt's to check out bms available from Tony Wilkes on here.
|
|||
|
|||
|
PuppaBB
Registered User
Joined: 09 January 2011 Location: Bilbao Status: Offline Points: 112 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 January 2012 at 8:56am |
||
|
And PD 12MH25?
|
|||
|
www.facebook.com/PuppaFran www.facebook.com/CrucialRuler www.facebook.com/DUBFever
|
|||
|
|||
|
smoore
Young Croc
Joined: 30 March 2011 Location: N.Devon Status: Offline Points: 932 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 January 2012 at 11:10pm |
||
|
Yea can anyone make a list of compatible/recommended drivers for these plans? Or similiar T/S parameters would probably be more useful. I have eminence alpha 12" drivers and was looking at building.
Top stuff anyway!
|
|||
|
|||
|
collision
Registered User
Joined: 09 January 2011 Location: Nottingham Status: Offline Points: 199 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 January 2012 at 4:35pm |
||
|
what driver did you adapt this plan for? would a pd123er work well in it?
thanks |
|||
|
ONE LIFE. AVE IT.
|
|||
|
|||
|
eltron
Registered User
Joined: 21 December 2007 Location: Finland Status: Offline Points: 399 |
Post Options
Thanks(0)
Quote Reply
Posted: 17 March 2011 at 6:31pm |
||
|
Yes, the current (yes, free) version is 8, downloadable on the site posted above.
Also it seems like you can install 8 parallel with 7 nowadays, just checked on two different systems, mac and win xp pc.
|
|||
|
|||
|
graftak
Registered User
Joined: 01 February 2011 Location: Netherlands Status: Offline Points: 39 |
Post Options
Thanks(0)
Quote Reply
Posted: 17 March 2011 at 1:42pm |
||
|
yes but I cant open this plan in the free version, it said I need version 8. something...
Cheers, Graftak
|
|||
|
|||
|
Post Reply
|
Page <1234> |
| Tweet |
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
collision wrote: