Peavey PV-4C Cutting out?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi,
I have a Peavey PV-4C and it is being used as a monitor amp with two 16ohm HK Monitors wired in parallel and a 8ohm ALTO speaker. It keeps cutting out when being used- The DOT Active comes on for a sec and then the Green power LED goes off 2 secs later it comes back on. All sound is lost when this happened. It occurs a dozen times a show. Any ideas?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Jake R Members Profile Send Private Message Find Members Posts Add to Buddy List Registered User Joined: 28 January 2011 Location: Kent Status: Offline Points: 124	Post Options Post Reply Quote Jake R Report Post Thanks(0) Quote Reply Topic: Peavey PV-4C Cutting out? Posted: 30 June 2012 at 12:14am
	Hi, I have a Peavey PV-4C and it is being used as a monitor amp with two 16ohm HK Monitors wired in parallel and a 8ohm ALTO speaker. It keeps cutting out when being used- The DOT Active comes on for a sec and then the Green power LED goes off 2 secs later it comes back on. All sound is lost when this happened. It occurs a dozen times a show. Any ideas?
	Thanks Jake

Tan-2 Members Profile Send Private Message Find Members Posts Add to Buddy List Registered User Joined: 29 April 2011 Location: Glasgow Status: Offline Points: 255	Post Options Post Reply Quote Tan-2 Report Post Thanks(0) Quote Reply Posted: 06 July 2012 at 8:02pm
	The pair of 16 ohms speakers wired to 8 is fine, and the 8 ohm put on the other channel should work just as good.. just one thing, does the the amp cut off with no speakers connected? as it might be 'seeing a sort some where so try it with out a load..... amps some times cut out if there's a sort connection made some where.. You can down load the schematic on line to check things out or email peavey for it...