Speakerplans.com Homepage
Forum Home Forum Home > General > Advanced Discussion
  New Posts New Posts RSS Feed - Poplar ply - any good?
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Poplar ply - any good?

 Post Reply Post Reply Page  <123
Author
Message
infrasound View Drop Down
Old Croc
Old Croc


Joined: 13 May 2011
Location: Brizzle
Status: Offline
Points: 2276
Post Options Post Options   Thanks (0) Thanks(0)   Quote infrasound Quote  Post ReplyReply Direct Link To This Post Posted: 17 February 2021 at 6:13pm
Thanks for the link snowflake! Just what I'm after.


Stiffness is determined by the bracing primarily, thickness second.

With proper bracing, "just" 9mm of poplar ply can exceed the stiffness of 24mm birch plywood in cabinet.

Add a CF/GF skin to that and you're fixing that wear resistanceParty


Nb. 'Proper bracing' involves multiple rounds in FEM analysis & isn't a walk in the park. With guessing the bracing, you can go surprisingly far though.





Edited by infrasound - 17 February 2021 at 6:16pm
Back to Top
VECTORDJ View Drop Down
Young Croc
Young Croc
Avatar

Joined: 11 June 2006
Location: United States
Status: Offline
Points: 513
Post Options Post Options   Thanks (0) Thanks(0)   Quote VECTORDJ Quote  Post ReplyReply Direct Link To This Post Posted: 17 February 2021 at 9:05pm
Why send all the time and work to make custom speaker cabs and use cheapie ply??? The best I have found is "Finland" 3/4" 4 x 8 foot 100 % birch exterior...........Like a Rock....
Back to Top
snowflake View Drop Down
Old Croc
Old Croc


Joined: 29 December 2004
Location: Bristol
Status: Offline
Points: 3118
Post Options Post Options   Thanks (0) Thanks(0)   Quote snowflake Quote  Post ReplyReply Direct Link To This Post Posted: 17 February 2021 at 9:19pm
Originally posted by VECTORDJ VECTORDJ wrote:

Why send all the time and work to make custom speaker cabs and use cheapie ply??? The best I have found is "Finland" 3/4" 4 x 8 foot 100 % birch exterior...........Like a Rock....


the good poplar isn't cheap - if anything it's more expensive than birch.
Back to Top
VECTORDJ View Drop Down
Young Croc
Young Croc
Avatar

Joined: 11 June 2006
Location: United States
Status: Offline
Points: 513
Post Options Post Options   Thanks (0) Thanks(0)   Quote VECTORDJ Quote  Post ReplyReply Direct Link To This Post Posted: 18 February 2021 at 8:02pm
I am basing My choice of Finland 4 x 8 sheets as to what is stocked in Maine USA. The Poplar cored ply here has very thin Birch outer layers and is not water proof. Sort of soft too.  Go Finland. Like a Rock.
Back to Top
stevie View Drop Down
Registered User
Registered User


Joined: 16 March 2008
Location: Dorchester
Status: Offline
Points: 425
Post Options Post Options   Thanks (0) Thanks(0)   Quote stevie Quote  Post ReplyReply Direct Link To This Post Posted: 04 March 2021 at 1:08pm
Originally posted by infrasound infrasound wrote:


Stiffness is determined by the bracing primarily, thickness second.

With proper bracing, "just" 9mm of poplar ply can exceed the stiffness of 24mm birch plywood in cabinet.


How exactly did you reach that conclusion?
Back to Top
snowflake View Drop Down
Old Croc
Old Croc


Joined: 29 December 2004
Location: Bristol
Status: Offline
Points: 3118
Post Options Post Options   Thanks (0) Thanks(0)   Quote snowflake Quote  Post ReplyReply Direct Link To This Post Posted: 05 March 2021 at 12:16pm
Originally posted by stevie stevie wrote:

Originally posted by infrasound infrasound wrote:


Stiffness is determined by the bracing primarily, thickness second.

With proper bracing, "just" 9mm of poplar ply can exceed the stiffness of 24mm birch plywood in cabinet.


How exactly did you reach that conclusion?

deflection of a panel is proportional to the width^3 and inversely proportional to the thickness^3.
Back to Top
infrasound View Drop Down
Old Croc
Old Croc


Joined: 13 May 2011
Location: Brizzle
Status: Offline
Points: 2276
Post Options Post Options   Thanks (0) Thanks(0)   Quote infrasound Quote  Post ReplyReply Direct Link To This Post Posted: 05 March 2021 at 1:48pm
Originally posted by stevie stevie wrote:

Originally posted by infrasound infrasound wrote:


Stiffness is determined by the bracing primarily, thickness second.

With proper bracing, "just" 9mm of poplar ply can exceed the stiffness of 24mm birch plywood in cabinet.


How exactly did you reach that conclusion?
]

FEA and some physical validation Smile
Back to Top
stevie View Drop Down
Registered User
Registered User


Joined: 16 March 2008
Location: Dorchester
Status: Offline
Points: 425
Post Options Post Options   Thanks (0) Thanks(0)   Quote stevie Quote  Post ReplyReply Direct Link To This Post Posted: 05 March 2021 at 2:27pm
And did all this FEA and physical validation result in a commercial product?
Back to Top
infrasound View Drop Down
Old Croc
Old Croc


Joined: 13 May 2011
Location: Brizzle
Status: Offline
Points: 2276
Post Options Post Options   Thanks (0) Thanks(0)   Quote infrasound Quote  Post ReplyReply Direct Link To This Post Posted: 05 March 2021 at 3:04pm
Nope, only for personal toys

IMO it would be hard to commercialise, specifically due to the cost, assembly complexity, tolerance, wear and definitely overall strength.

I'm happy to manage these personally, but wouldn't scale well upwards from there
Back to Top
 Post Reply Post Reply Page  <123

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.06
Copyright ©2001-2023 Web Wiz Ltd.

This page was generated in 0.078 seconds.