Print Page | Close Window

Digi Pro Amp module Fixed!!!

Printed From: Speakerplans.com
Category: General
Forum Name: Electro Frying Forum
Forum Description: Talk about drivers, processors and mixers
URL: https://forum.speakerplans.com/forum_posts.asp?TID=100768
Printed Date: 25 August 2019 at 8:12am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: Digi Pro Amp module Fixed!!!
Posted By: nuclearbass
Subject: Digi Pro Amp module Fixed!!!
Date Posted: 30 November 2017 at 12:44pm
Hi guys I’m trying to source a service manual for the amp module for the dB tech 18D box

-------------
one life - have fun!
Force fusion pro audio



Replies:
Posted By: nuclearbass
Date Posted: 07 December 2017 at 1:42am
Still on the look out for this, I’m hoping not to have to send it back to db for repair and get shafted 🙈

-------------
one life - have fun!
Force fusion pro audio


Posted By: freddymendez
Date Posted: 07 December 2017 at 8:49am
good luck, nobody has the infos on these digipro modules

-------------
120-140 bpm, pianos and bass.
diesel, the fuel of professionals.
mendez/manchester


Posted By: dylan-penguinmedia
Date Posted: 07 December 2017 at 9:00am
Try Ampman...


Posted By: nuclearbass
Date Posted: 08 December 2017 at 11:23am
I’ve dropped him an email cheers

-------------
one life - have fun!
Force fusion pro audio


Posted By: nuclearbass
Date Posted: 01 January 2018 at 9:07pm
Andy amp says he can’t help, any other suggestions

-------------
one life - have fun!
Force fusion pro audio


Posted By: efinque
Date Posted: 01 January 2018 at 10:23pm
I too have a defunct sub15... I think the problem is with the driver. Try dB Tech directly?

I've found some OEM amp modules but they don't provide enough power (50W max)


-------------
https://soundcloud.com/efinque" rel="nofollow - ***SOUNDCLOUD***
https://www.mixcloud.com/efinque/" rel="nofollow - ***MIXCLOUD***


Posted By: nuclearbass
Date Posted: 12 January 2018 at 6:57pm
Originally posted by efinque efinque wrote:

I too have a defunct sub15... I think the problem is with the driver. Try dB Tech directly?

I've found some OEM amp modules but they don't provide enough power (50W max)


DBS charges are pretty steep
But looks like I’m going to have to suck it up

-------------
one life - have fun!
Force fusion pro audio


Posted By: kedwardsleisure
Date Posted: 12 January 2018 at 11:22pm
RCF also use the digimod amps. ISTR the last one didn't leave much change from £400.



-------------
K. Edwards Electronics Engineers

North Staffordshire



Posted By: nuclearbass
Date Posted: 13 January 2018 at 6:39am
Originally posted by kedwardsleisure kedwardsleisure wrote:

RCF also use the digimod amps. ISTR the last one didn't leave much change from £400.



Not what I wanted to hear 😂
It’s frustraiting now as I’ve had it to 2 good amp guys that can’t find any issues with it and cant work out why it’s stuck in mute mode.
It powers up fine but won’t come out of mute, looks like it’s going to one of DBs authorised guys then, I have a feeling I’m gunna need my vasciline



-------------
one life - have fun!
Force fusion pro audio


Posted By: nuclearbass
Date Posted: 13 January 2018 at 6:42am
Also am I right in thinking those digimod modules are powersoft?
There’s nothing on the module no model or branding ?

-------------
one life - have fun!
Force fusion pro audio


Posted By: smitske96
Date Posted: 13 January 2018 at 9:01am
From what i've heard, those digimod modules are definitely not powersoft.


Posted By: nuclearbass
Date Posted: 13 January 2018 at 9:05am
Originally posted by smitske96 smitske96 wrote:

From what i've heard, those digimod modules are definitely not powersoft.


Who’s made them mate do you know?

Just googled digimod
And come across these
http://www.powersoft-audio.com/en/oem-solutions/digimod#DigiMod%203004PFC2" rel="nofollow - http://www.powersoft-audio.com/en/oem-solutions/digimod#DigiMod%203004PFC2

Was also told there the same as what Sherman are using in their powered stuff and I believe there using powersoft too

-------------
one life - have fun!
Force fusion pro audio


Posted By: freddymendez
Date Posted: 13 January 2018 at 2:09pm
They're called digipro not digimod, at least that is what it says on the back of my broken modules

-------------
120-140 bpm, pianos and bass.
diesel, the fuel of professionals.
mendez/manchester


Posted By: nuclearbass
Date Posted: 13 January 2018 at 4:00pm
I did wonder as ours don’t say powersoft anywhere on them

-------------
one life - have fun!
Force fusion pro audio


Posted By: kedwardsleisure
Date Posted: 13 January 2018 at 5:03pm
the company that makes them is a subsidiary of the rcf/db tech company. They are very similar to the powersoft ones in basic form, ie smpsu/class D with a dsp front end. IMHO the quality is nowhere near the powersoft ones.


The idea is that a very few modules can be fitted in lots of cabs with the appropriate firmware downloaded to the DSP.

When I last spoke to Ampman I'm sure he said they didnt repair them, just replaced them.



-------------
K. Edwards Electronics Engineers

North Staffordshire



Posted By: nuclearbass
Date Posted: 13 January 2018 at 11:03pm
Throw away amp modules 😳😳😳😳

-------------
one life - have fun!
Force fusion pro audio


Posted By: nuclearbass
Date Posted: 15 January 2018 at 11:47pm
Originally posted by freddymendez freddymendez wrote:

good luck, nobody has the infos on these digipro modules

It would seem that people in Europe have them
Fingers crossed
Should know if there good Tomorow



-------------
one life - have fun!
Force fusion pro audio


Posted By: kedwardsleisure
Date Posted: 15 January 2018 at 11:58pm
yeah sorry digimod/digipro

little italian oblong black things that have always gone bang when they arrive with me.

ah yes, AEB Industriale





-------------
K. Edwards Electronics Engineers

North Staffordshire



Posted By: nuclearbass
Date Posted: 16 January 2018 at 9:48am
If we don’t get to bottom of it today then it looks like it could be coming your way if you have the drawing.
I don’t think it’s gone bang, not through abuse anyway, it just powered up and stuck in mute one day.

Not sure what happened to it

-------------
one life - have fun!
Force fusion pro audio


Posted By: nuclearbass
Date Posted: 16 January 2018 at 10:00am
Originally posted by kedwardsleisure kedwardsleisure wrote:

yeah sorry digimod/digipro

little italian oblong black things that have always gone bang when they arrive with me.

ah yes, AEB Industriale





Are you feeling generous and fancy sharing 🤔,

-------------
one life - have fun!
Force fusion pro audio


Posted By: kedwardsleisure
Date Posted: 18 January 2018 at 11:47am
Ampman have them

https://shop.ampman.co.uk/rcf-digipro-1000-subwoofer-amp-module-1915-p.asp" rel="nofollow - https://shop.ampman.co.uk/rcf-digipro-1000-subwoofer-amp-module-1915-p.asp


I think you'll need the correct config downloading before fitting



-------------
K. Edwards Electronics Engineers

North Staffordshire



Posted By: nuclearbass
Date Posted: 19 January 2018 at 9:56am
3 people I’ve spoken to now who have the drawing but don’t fix them, yet won’t share the drawing

What’s wrong with people 🙄

-------------
one life - have fun!
Force fusion pro audio


Posted By: nuclearbass
Date Posted: 19 January 2018 at 11:31am
How ever I think I now have them and will gladly share if it helps other people out

-------------
one life - have fun!
Force fusion pro audio


Posted By: nuclearbass
Date Posted: 01 March 2018 at 12:49pm
So after many many people saying this couldnt be repaired, 2 guys looking at it and no solution, the guys at matrix asked for a quick look at it, came back today fully repaired.....

so if any one has any that are "unrepairable" give matrix a try :)

-------------
one life - have fun!
Force fusion pro audio


Posted By: simonp1100
Date Posted: 01 March 2018 at 12:59pm
Most Powersoft stuff can be fixed, they just need a bit of care.

Big smile


Posted By: nuclearbass
Date Posted: 01 March 2018 at 1:12pm
Originally posted by simonp1100 simonp1100 wrote:

Most Powersoft stuff can be fixed, they just need a bit of care.

Big smile


It’s not powersoft

-------------
one life - have fun!
Force fusion pro audio


Posted By: simonp1100
Date Posted: 01 March 2018 at 1:18pm
I assumed it was a Powersoft Digi-Mod amplifier, so is it a digital modulator ????.


Posted By: nuclearbass
Date Posted: 01 March 2018 at 1:33pm
its a digi pro, i was initially miss informed of the brand and model

-------------
one life - have fun!
Force fusion pro audio


Posted By: ecoso
Date Posted: 05 March 2018 at 6:38pm
FWIW, Ive benn running a small pa for 25 yrs now using traditional (!)and ,in the last 6 or so yrs ,these digipro amps in db tech flexsys system.
NEVER blown a trad amp.
Blown 5 digi amps...Had another one go last Sat!
I'm not convinced of their robustness myself...
Light and cheap BUT expensive  for replacements.
Now I wish I'd gone with another system,but flexsys is out of date now anyway, so hopefully others wont follow my foolish footsteps!
Will look into the repairer mentioned,thanks for that.
cheers ed



Posted By: smitske96
Date Posted: 05 March 2018 at 7:45pm
On several dutch forums there are also bad experiences with the digipro (NOT digimod) modules.
Worst part of it all was the service from Db technologies. I've read story's of waiting 6 months for a replacement.


Posted By: nuclearbass
Date Posted: 06 March 2018 at 7:48am
Originally posted by smitske96 smitske96 wrote:

On several dutch forums there are also bad experiences with the digipro (NOT digimod) modules.
Worst part of it all was the service from Db technologies. I've read story's of waiting 6 months for a replacement.


Same here with db, I’m supprised how in helpful they are.

-------------
one life - have fun!
Force fusion pro audio


Posted By: ecoso
Date Posted: 06 March 2018 at 8:55am
I get my replacements from CUK Audio who ,i think,are main dealers for Db Tech in Uk,which has been fine.  Good service an all, but one time they were out of stock and I had a couple months wait before they got more from Italy, which had me sweating it a bit. Dont bust an amp over their summer break! Unless you've got spares! Stuart Cunningham who runs it muttered something once about a guy who would look at them and I've got a couple boxed up ready to send but haven't got round to getting his details yet.I'll ask about it again when I order another unit and let you know if its a goer.

2 or 3 years ago someone at Ampman told me it was a repairable unit on the phone, then they said that they didn't repair them after I sent it to them. After a £50 inspection fee! Hmm.

As for DbTech themselves; I guess that to them we are just a small place a long way away that speak a funny language....!




Posted By: nuclearbass
Date Posted: 06 March 2018 at 9:10am
Originally posted by ecoso ecoso wrote:

I get my replacements from CUK Audio who ,i think,are main dealers for Db Tech in Uk,which has been fine.  Good service an all, but one time they were out of stock and I had a couple months wait before they got more from Italy, which had me sweating it a bit. Dont bust an amp over their summer break! Unless you've got spares! Stuart Cunningham who runs it muttered something once about a guy who would look at them and I've got a couple boxed up ready to send but haven't got round to getting his details yet.I'll ask about it again when I order another unit and let you know if its a goer.

2 or 3 years ago someone at Ampman told me it was a repairable unit on the phone, then they said that they didn't repair them after I sent it to them. After a £50 inspection fee! Hmm.

As for DbTech themselves; I guess that to them we are just a small place a long way away that speak a funny language....!




Are they a Scottish company, when I called db they gave me their main distro and repair Centre number for uk and if I recall right they were in Scotland

They weren’t interested either 😂

-------------
one life - have fun!
Force fusion pro audio


Posted By: ecoso
Date Posted: 06 March 2018 at 10:35am
Thats right they're in Glasgow.
And yeah, they won't repair the modules,just supply replacements as far as I know.


Posted By: voron
Date Posted: 13 November 2018 at 8:57am
All DIGIPRO's modules are repairable, feel free for contact with me. I have enough knowledge, skills & experience.



Posted By: Kobe
Date Posted: 13 November 2018 at 11:18am
Originally posted by voron voron wrote:

All DIGIPRO's modules are repairable, feel free for contact with me. I have enough knowledge, skills & experience.

 
this very timely ,  I have an RCF art705as sub with a broken Digipro 600m ,  the PSU is faulty ( i guess amp board is fine).
do you have a schematic for the 600m ? ( i can only source the 1000s online) . thanks in advance
 
 
Nuclearbass -  who helped you out in Matrix? i may well get in touch
 
 
 


Posted By: voron
Date Posted: 13 November 2018 at 1:03pm
Kobe, give me your e-mail



Posted By: Kobe
Date Posted: 13 November 2018 at 1:13pm
Originally posted by voron voron wrote:

Kobe, give me your e-mail

 
thanks ,


Posted By: voron
Date Posted: 13 November 2018 at 1:25pm
done



Posted By: Kobe
Date Posted: 13 November 2018 at 2:02pm
Originally posted by voron voron wrote:

done

 
great got it , thanks very much.
 
just to check , is the schematic you've sent for a '600m PSU'? 
quickly looking at the psu module in front of me it appears different , eg mine has 2x1000uf capacitors after the rectifier rather than '470uf' in the drawing sent.
mine is revision 3.1.
 
thanks again


Posted By: ollie.turner226
Date Posted: 31 January 2019 at 1:33pm
Do you have any contact info for Matrix? Tried looking online but couldn't find anything to do with speaker repair... Thank you! :)

If it helps I've got two dB S118's that have been deemed 'unrepairable', would much rather have the modules repaired than replaced!


Posted By: voron
Date Posted: 31 January 2019 at 1:59pm
check PM please


Posted By: ollie.turner226
Date Posted: 31 January 2019 at 2:10pm
how do I do that? new to this forum and stuggling to find the private messaging page


Posted By: voron
Date Posted: 31 January 2019 at 2:14pm
write to me at facebook



Posted By: Mrvinh
Date Posted: 20 March 2019 at 5:48pm
hi sir, i am fixing the digipro100s of RCF NX L23 A, but no datasheet, can you provide me please, this is my email address: tuanvinhbg91@icloud.com thank you very much


Posted By: byronit
Date Posted: 05 June 2019 at 1:48am
Hi i too have an RCF art705as sub with a  bad  Digipro 600m , ( humming through speaker, cockroach damage) if i could get a schematic  from a knowledgeable person i would be grateful. i cannot identify r29 value  (burnt) 
Thanks in advanve 


Posted By: voron
Date Posted: 05 June 2019 at 8:31am
Please send me photos of your faulty digipro and I'll try to help you.  djvoron@list.ru


Posted By: MarjanM
Date Posted: 05 June 2019 at 3:36pm
Whats your FB? Having someone that can fix digipro is great asset.

-------------
Marjan Milosevic
MM-Acoustics
www.mm-acoustics.com
https://www.facebook.com/pages/MM-Acoustics/608901282527713


Posted By: byronit
Date Posted: 01 July 2019 at 3:50am
Thanks for your assistance i have emailed the files as requested. The sub emits a hum possibly the caps are bad , ill  will check power supply for ac ripple, any other advise


Posted By: fmatteo93
Date Posted: 08 July 2019 at 6:12pm
Good afternoon to everyone.
I also have some issues with my DIGIPRO 600M amplifier. 
Can I receive the electrical schema?

Many thanks,
Matteo Falchi



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net