Good old RCF L15P200A
Printed From: Speakerplans.com
Category: Plans
Forum Name: Plan Requests
Forum Description: All plan requests here
URL: https://forum.speakerplans.com/forum_posts.asp?TID=102358
Printed Date: 18 April 2024 at 4:41am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Good old RCF L15P200A
Posted By: Tonskulus
Subject: Good old RCF L15P200A
Date Posted: 07 August 2018 at 7:50am
|
Got a mint pair for 50 bucks. Good for Cubo15 or some tapped horn enclosure? Reflex is out of question because they are boring. Fs 29Hz Qts 0.28 Qes 0.3 Qms 10 Vas 280L Bl 17,2 Xmax +/- 9mm 4 inch voice coil So according to specs, looks like these might be quite potential drivers anyway. Does anyone have some experience about these? |
Replies:
Posted By: csg
Date Posted: 07 August 2018 at 10:25am
|
ported horn? - the Nexo SI2000 bin used a variant of these, and they were highly effective. ------------- “The fact is this is about identifying what we do best and finding more ways of doing less of it better” |
Posted By: Elliot Thompson
Date Posted: 07 August 2018 at 1:24pm
|
Make sure your drivers are indeed L 15P 200A and not L 15P 200. The RCF L 15P 200 offered different parameters and, were marketed for reflex cabinets. Best Regards, ------------- Elliot Thompson |
Posted By: Tonskulus
Date Posted: 08 August 2018 at 5:43am
|
These are indeed 200A models. That nexo si2000 looks like interesting. However I'm trying to figure out if SS15 tapped horn would suite this driver too! Tham15 might be too tight/small (not a big difference tho, but SS15 is tuned lower). Just wondering if this kind of high VAS driver is ok for tapped horn duty? High compression horns are out of question for sure I think. |
Posted By: Tonskulus
Date Posted: 16 August 2018 at 3:00pm
|
Tested cubo15 extended with this driver, not good :( |
Posted By: gen0me
Date Posted: 16 August 2018 at 4:50pm
This speaker has so low bl = high excursion: First 2: compound horn, third one is tapped. ------------- I appreciate every like :)) https//www.facebook.com/genomesoundsystems Mixes: https://www.mixcloud.com/gen-ome/ |
Posted By: gen0me
Date Posted: 19 August 2018 at 3:47am
Input for the tapped: Can just adjust Cubo. This one is also with chamber. Mms is off. To be fair I wasnt sure ts, I picked some of them from 200 AK. How is xmax calculated here? Watch inputing there is TH1. Rear of the driver between L23 and L34. Try to make L12 -> 0
------------- I appreciate every like :)) https//www.facebook.com/genomesoundsystems Mixes: https://www.mixcloud.com/gen-ome/ |