Print Page | Close Window

DB mark DP48II software/control software

Printed From: Speakerplans.com
Category: General
Forum Name: Electro Frying Forum
Forum Description: Talk about drivers, processors and mixers
URL: https://forum.speakerplans.com/forum_posts.asp?TID=102959
Printed Date: 19 June 2019 at 10:34pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: DB mark DP48II software/control software
Posted By: dlyxover
Subject: DB mark DP48II software/control software
Date Posted: 05 December 2018 at 3:04pm
I have a DB mark DP48II.

Is there any software up available for it? if so how is it done?

Its currently on v4.3.2.

I also have a DB mark DP36II which is on A-DV1.02.

My Mac (laptop) died from logic board failure, I was using a Mac with parallels desktop (running windows XP I think) which has worked fine for years. 

New laptop with parallels desktop and windows 10 the DP48 is not showing up on the control software but the DP36 is.


Would anyone know how, why or what to the above?

thanks




-------------
In the Truth there is no news, and in the News there is no truth



Replies:
Posted By: bee
Date Posted: 05 December 2018 at 8:16pm
you need to use the software number that matches your product firmware number.
have you down loaded the drivers for your dp48.


-------------
https://www.elements-audio.com


Posted By: dlyxover
Date Posted: 05 December 2018 at 8:52pm
Hi bee

I thought I had but it appears not.

Could you point me to the correct ones?

In windows the 'prolific usb to serial port' has a error on on DP48 but not the DP36

" This device cannot start. (Code 10)

A device which does not exist was specified. "



-------------
In the Truth there is no news, and in the News there is no truth


Posted By: bee
Date Posted: 05 December 2018 at 10:58pm
whats the firmware code on the device.


-------------
https://www.elements-audio.com


Posted By: dlyxover
Date Posted: 05 December 2018 at 11:31pm
Where do I find that?

-------------
In the Truth there is no news, and in the News there is no truth


Posted By: bee
Date Posted: 06 December 2018 at 11:08pm
on the unit, go through menu options. device settings..

-------------
https://www.elements-audio.com


Posted By: dlyxover
Date Posted: 07 December 2018 at 2:03pm
on the system set up menu 

option 6 (system information)

its says "speaker processor V4.3.2"

can't find anything else.



-------------
In the Truth there is no news, and in the News there is no truth


Posted By: Mircea Bartic
Date Posted: 07 December 2018 at 2:51pm
I Have an old Driver DVD in my database. It should work with your version.
It's uploading to wetransfer as we speak


-------------
general manager & head designer at nexus-acoustics research
http://www.facebook.com/nexus.acoustics.research" rel="nofollow - http://www.facebook.com/nexus.acoustics.research

Ex Nexus_3


Posted By: Mircea Bartic
Date Posted: 07 December 2018 at 3:11pm
https://wetransfer.com/downloads/a955231c453f8c5424de07557ffc310020181207150106/9770a66444f2286a73d0d4520d0edf0320181207150106/7b973d" rel="nofollow - https://wetransfer.com/downloads/a955231c453f8c5424de07557ffc310020181207150106/9770a66444f2286a73d0d4520d0edf0320181207150106/7b973d

-------------
general manager & head designer at nexus-acoustics research
http://www.facebook.com/nexus.acoustics.research" rel="nofollow - http://www.facebook.com/nexus.acoustics.research

Ex Nexus_3


Posted By: dlyxover
Date Posted: 07 December 2018 at 4:08pm
Mircea I've installed the driver from your download and the software but still no joy.

I'm beginning to think its a windows 10 software issue or the USB to serial board on the DP48 has failed.

In windows device manager, its still got the yellow ! triangle and 

"This device cannot start. (Code 10)

A device which does not exist was specified."

in device status.

But with the DP36 (which is working) it dose not have warning in device manager.


-------------
In the Truth there is no news, and in the News there is no truth


Posted By: kedwardsleisure
Date Posted: 07 December 2018 at 4:47pm
I've had a similar problem, tried it on an XP computer and worked first time, was the same firmware version as yours too.



-------------
K. Edwards Electronics Engineers

North Staffordshire



Posted By: freddymendez
Date Posted: 07 December 2018 at 5:10pm
Perhaps they used a fake prolific serial chip:

http://wp.brodzinski.net/hardware/fake-pl2303-how-to-install/" rel="nofollow - http://wp.brodzinski.net/hardware/fake-pl2303-how-to-install/


-------------
120-140 bpm, pianos and bass.
diesel, the fuel of professionals.
mendez/manchester


Posted By: dlyxover
Date Posted: 07 December 2018 at 5:21pm
Im going to try a different version of windows, only use windows for the db mark processor.

Can the firmware be updated?


-------------
In the Truth there is no news, and in the News there is no truth


Posted By: dlyxover
Date Posted: 07 December 2018 at 8:40pm
SOLUTION

It appears that Windows 10 don't play nice with the USB-serial port in the DB Mark DP48II.

Windows 7 Ultimate works with all 3 DB Mark processors I have (DP48II, DP36II and DP26IV)

Windows 10 did work with DP36II and DP26IV.

Hope my little tech adventure helps other out.

Thanks to all for their input.


-------------
In the Truth there is no news, and in the News there is no truth



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net