Horn length of USBv2s
Printed From: Speakerplans.com
Category: General
Forum Name: Newbie Discussion
Forum Description: Newbie Discussion/Questions. Look less stupid here...
URL: https://forum.speakerplans.com/forum_posts.asp?TID=102960
Printed Date: 19 April 2024 at 4:04am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Horn length of USBv2s
Posted By: jackath
Subject: Horn length of USBv2s
Date Posted: 05 December 2018 at 4:38pm
|
Some what new to this stuff. Have done some searches but didn't turn up anything too useful, just http://https://forum.speakerplans.com/usb-bin_topic4361_page10. - this thread and some designs for what I think was the 1st version of USB before Stable Audio acquired license I'm trying to find horn length (perhaps maongst other parameters) so I can more accurately align the Orbit 4s I have stacked on stop Perhaps I'm missing something obvious. Can anyone point to the right place or know what the horn length is of the USB v2? TIA
|
Replies:
Posted By: gen0me
Date Posted: 05 December 2018 at 11:21pm
Measure dont length/speed divide.------------- I appreciate every like :)) https//www.facebook.com/genomesoundsystems Mixes: https://www.mixcloud.com/gen-ome/ |
Posted By: fatfreddiescat
Date Posted: 06 December 2018 at 8:00am
| You could take a measurement with 'Room Eq Wizard' on a laptop using the built in mic, not perfect but far more accurate than a tape measure. |
Posted By: jackath
Date Posted: 06 December 2018 at 11:00pm
|
True, thanks for pointing that out. I had considered measuring physically but wanted more accuracy. A combination of both should improve the situation Thanks for replies
|