B&C Driver ID
Printed From: Speakerplans.com
Category: General
Forum Name: General Forum
Forum Description: Open Discussion / Questions
URL: https://forum.speakerplans.com/forum_posts.asp?TID=103121
Printed Date: 19 April 2024 at 1:10am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: B&C Driver ID
Posted By: dymondaudio
Subject: B&C Driver ID
Date Posted: 10 January 2019 at 2:07pm
|
Does anyone recognise this driver? I have looked through B&C's archived drivers but can't find a match. It was removed from an Ohm BR12, one of their older designs before moving to BMS comps. It measures approx 155mm across. ------------- If you judge a fish by its ability to climb a tree, it will live its whole life believing that it is stupid |
Replies:
Posted By: dymondaudio
Date Posted: 10 January 2019 at 2:08pm
|
Posted By: Djdarch
Date Posted: 10 January 2019 at 4:59pm
|
de25 from the look of it , could do with another pic to see the profile of the driver but im 99% sure its a de25 |
Posted By: dymondaudio
Date Posted: 10 January 2019 at 5:02pm
|
I thought that but b&c list the de25 with a diameter of 134mm but this one is around 155mm
------------- If you judge a fish by its ability to climb a tree, it will live its whole life believing that it is stupid |
Posted By: Djdarch
Date Posted: 10 January 2019 at 5:17pm
|
is it a 1"? |
Posted By: Djdarch
Date Posted: 10 January 2019 at 5:20pm
|
Im sure its a de25 , maybe the specs are wrong on the B&C website. I have one here want me to measure it ? |
Posted By: Peter Jan
Date Posted: 10 January 2019 at 8:10pm
|
Probably a DE-45, it's a tad bigger than DE-25, but looks about the same. |