Print Page | Close Window

Porn Horns

Printed From: Speakerplans.com
Category: General
Forum Name: General Forum
Forum Description: Open Discussion / Questions
URL: https://forum.speakerplans.com/forum_posts.asp?TID=103124
Printed Date: 29 March 2024 at 6:53am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Porn Horns
Posted By: boots-hifi
Subject: Porn Horns
Date Posted: 10 January 2019 at 4:29pm
Who beat me to it and bought the porn horns from void via eBay?



Replies:
Posted By: spongebob
Date Posted: 10 January 2019 at 4:40pm
There's three left still under auction number 173731465527


Posted By: boots-hifi
Date Posted: 10 January 2019 at 5:02pm
3s no good! I’m greedy and wanted all of them.


Posted By: Djdarch
Date Posted: 10 January 2019 at 5:09pm
they've just sold, not me either!


Posted By: MattStolton
Date Posted: 10 January 2019 at 5:15pm
What's Lev planning...

-------------
Matt Stolton - Technical Director (!!!) - http://www.wildingsound.co.uk" rel="nofollow - Wilding Sound Ltd
"Sparkius metiretur vestra" - "Meter Your Mains"


Posted By: levyte357-
Date Posted: 10 January 2019 at 10:53pm
Originally posted by MattStolton MattStolton wrote:

What's Lev planning...

I need 1x more.

LOL


-------------
Global Depopulation - Alive and Killing.


Posted By: levyte357-
Date Posted: 10 January 2019 at 10:55pm
Also what''s the recommended compression horn for these?

-------------
Global Depopulation - Alive and Killing.


Posted By: toastyghost
Date Posted: 10 January 2019 at 10:59pm
The one that was designed for it, I assume. You can rip it out of any Void Stasys Phil cabinet


Posted By: boots-hifi
Date Posted: 10 January 2019 at 11:54pm
I’d imagine something like the BMS coaxial HF would work well. The original porn horns I think were loaded with P-Audio although Toasty or Brian M would be able to confirm this. Not to sure what I’d put in the 12” . BMS or B&C spring to mind, maybe Fatial Pro could fit the bill. I’d try and find the most suitable unit for the porn horn, sim it and then choose a HF based on these results. Either way I’d be interested to know what and if the newer drivers outperform the original pornhorns.


Posted By: pfly
Date Posted: 10 January 2019 at 11:58pm
I think HF was Beyma CP-755Nd when Porn Horn was available

Does anyone have directivity plot for the 12" horn? It would make it quite easy to choose appropriate HF horn to go with the thing


Posted By: toastyghost
Date Posted: 11 January 2019 at 12:14am
Originally posted by pfly pfly wrote:

I think HF was Beyma CP-755Nd when Porn Horn was available

Does anyone have directivity plot for the 12" horn? It would make it quite easy to choose appropriate HF horn to go with the thing


Yeah it was. Like I say, the Porn Horn v2 HF horn was repurposed to use in the Stasys Phil


Posted By: pfly
Date Posted: 11 January 2019 at 12:35am
That I already knew. All things don't quite match though. I think Porn Horn was advertised around 40-60deg nominal while Phil is advertised as 80deg horizontal. If I was in a situation of looking for HF horn to go on top of Porn MF I'd most likely just measure the thing myself and then decide what kind of HF solution I'd like use with it based on MF dispersion, resonance and distortion characteristics.


Posted By: Audiosurge
Date Posted: 21 January 2019 at 9:18am
That woulda been me :) 
We are also looking to remake these using different hf section section. Speaking with Rog and he suggested 60-40 around the same size as the old phill horn that was in them. Then he also said this about the low mid section  45 degrees up to around 1kHz. It's a tight 45 degrees down to 500Hz then it gets wider. Vertical dispersion around 30 to 35 degrees. What’s everyone else using above these. I can’t seem to find any horns anywhere near the size needed any help would be much appreciated!!
Ian Mcdermott 
Audio surge 


Posted By: levyte357-
Date Posted: 21 January 2019 at 12:23pm
Originally posted by toastyghost toastyghost wrote:

The one that was designed for it, I assume. You can rip it out of any Void Stasys Phil cabinet


https://forum.speakerplans.com/new-stasys-phil_topic46090_page3.html" rel="nofollow - https://forum.speakerplans.com/new-stasys-phil_topic46090_page3.html

Originally posted by levyte357- levyte357- wrote:



Apparently Phil uses the same horn as above.

Anyone have Void part number, or know where to locate these?


Originally posted by Aman Gebru Aman Gebru wrote:

Not the same horn but very close.

Phil HF horn has a wider horizontal dispersion than the P horn HF horn.


So, any "Phil" Horns lying around ?


-------------
Global Depopulation - Alive and Killing.


Posted By: Audiosurge
Date Posted: 21 January 2019 at 12:53pm
Void won’t sell me any


Posted By: toastyghost
Date Posted: 21 January 2019 at 9:57pm
How about LTH142?

https://faitalpro.com/en/products/HF_Horns/product_details/index.php?id=903020105" rel="nofollow - https://faitalpro.com/en/products/HF_Horns/product_details/index.php?id=903020105

Put an 18sound NST3 on it....


Posted By: bass*en*mass
Date Posted: 22 January 2019 at 8:36pm
18s nd3st, nd3t, hd3000t + xr1464/xt1464 or the faital horn would get my vote aswell re. HF and output balance + more or less suitable to dispersion requirements..



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net