Print Page | Close Window

stupid question about tour labels

Printed From:
Category: General
Forum Name: General Forum
Forum Description: Open Discussion / Questions
Printed Date: 05 April 2020 at 8:21pm
Software Version: Web Wiz Forums 12.03 -

Topic: stupid question about tour labels
Posted By: Mr Ed
Subject: stupid question about tour labels
Date Posted: 31 August 2019 at 7:04pm
Ok   how do i wipe writting off a tour label so i can re-label it  

been written on with a sharpie   tried  foam cleaner, label remover and good old white spirit   no luck at all 

sure im about to be shamed with a simple answer here -) 



It's Nice to be Nice !

Posted By: Alex_C
Date Posted: 31 August 2019 at 7:10pm
Isopropyl alcohol Thumbs Up

Posted By: Danny A
Date Posted: 31 August 2019 at 7:45pm
PAL Clean" rel="nofollow -

Posted By: odc04r
Date Posted: 31 August 2019 at 8:46pm
If IPA won;t shift it, then move on to Acetone. But be careful with it as it will likely damage the flight case surface and any other paint you get it on. Nail polish remover is acetone based.

Posted By: Mr Ed
Date Posted: 31 August 2019 at 9:04pm
thanks Guys  appreciate it Smile

It's Nice to be Nice !

Posted By: snowflake
Date Posted: 31 August 2019 at 9:48pm
oven cleaner if you have that handy

Posted By: kevinmcdonough
Date Posted: 01 September 2019 at 1:06pm
PAL cleaner as linked above is the official one, but a squirt of WD40 also works great Smile

Posted By: James Tengo
Date Posted: 01 September 2019 at 1:41pm
Drop of meths on a cloth also does the trick

Posted By: AndyWave
Date Posted: 01 September 2019 at 2:51pm
Have you tried PRF label off, or other citrus based stuff?" rel="nofollow -

Many times removes permanent sharpie markings off plastics, depending how long ink has been applied. Label off needs good few minutes to be effective.

Fresh citrus odour is a plus compared to tougher chemicals...

Next would be the oven cleaner.

torturing electrons since ......

Posted By: ceharden
Date Posted: 01 September 2019 at 11:24pm
As already mentioned, Isopropyl Alcohol (Isopropanol or IPA) is the best stuff to use.  Evaporates without leaving any residue, won't affect most other materials.  Also good for cleaning whiteboards etc in addition to removing flux residues from PCB's and many other uses.

Posted By: Kr3 DSS
Date Posted: 14 September 2019 at 11:04pm
Scribbling over with a dry wipe marker and wiping it off, a few goes of that and its gone. Works a treat when the idiots use the wrong pen on the darts score board in the pub 


Destiny Sound

Posted By: Digbethdave
Date Posted: 15 September 2019 at 2:08pm
Ipa. Don't use sharpies. Get some pentel markers. 

Posted By: csg
Date Posted: 15 September 2019 at 8:13pm
everyone in the industry uses sharpies and IPA removes this just fine. Really not complicated!

“The fact is this is about identifying what we do best and finding more ways of doing less of it better”

Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.03 -
Copyright ©2001-2019 Web Wiz Ltd. -