Lighting Talk - Avo pearl tiger help

Print Page | Close Window

Avo pearl tiger help

Printed From: Speakerplans.com
Category: Other Chat
Forum Name: Lighting Talk
Forum Description: All your lampy, laser and 'other' special FX needs....
URL: https://forum.speakerplans.com/forum_posts.asp?TID=104437
Printed Date: 27 March 2026 at 5:30am
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com

Topic: Avo pearl tiger help

Posted By: aziz
Subject: Avo pearl tiger help
Date Posted: 30 October 2019 at 4:36pm

have a pearl tiger and when I tried to patch some movers onto it I'm getting a error message saying " Memory allocation out if memory " or "memory corrupt"

Have removed the internal stick , formatted it and reloaded the personalities from the avo site and the same is happening.

Even tried another stick and still no joy

Any help is appreciated

Replies:

Posted By: jacethebase
Date Posted: 11 November 2019 at 10:17pm

Can you patch generics? If so I would say try a different format on the stick

If not, try re-seating the RAM.

-------------
www.wedding-production.co.uk

www.stage2sound.com

Posted By: James Tengo
Date Posted: 12 November 2019 at 7:29am

Just to check, you are going - patch key - fixtures soft key - usb stick 0 / usb stick 1 - then getting the message, or are you getting the message before selecting the usb stick?

Posted By: aziz
Date Posted: 12 November 2019 at 6:01pm

I have reseated the ram and cleaned the connections to the extended memory board, formatted the internal memory stick and reloaded it,

For a while that seemed to work and everything was working but in the last couple of days it has started to act up again.

The extended memory check is failing,when I patch a fixture I sometimes get a memory allocation or memory corrupt warning,

Other times when I try to patch a fixture the whole desk will just freeze.

I could try it tonight and it could work perfect and then if I tried it in the morning it would act up.

Posted By: aziz
Date Posted: 12 November 2019 at 6:03pm

Getting a error message sometimes when I select a disk and sometimes after I select a fixture