General Forum - phase: bph18 + tham15 together : can you do it?

Print Page | Close Window

phase: bph18 + tham15 together : can you do it?

Printed From: Speakerplans.com
Category: General
Forum Name: General Forum
Forum Description: Open Discussion / Questions
URL: https://forum.speakerplans.com/forum_posts.asp?TID=105432
Printed Date: 18 April 2024 at 11:20am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: phase: bph18 + tham15 together : can you do it?

Posted By: tulipkapy
Subject: phase: bph18 + tham15 together : can you do it?
Date Posted: 29 June 2020 at 3:23am

I'm designing a techno sound system the system I have a "similar turbo" stack per side:

2 speakers 1 "+8" + 15bph

4 bass 18 (18tbx100) es18bph

and I also have 8 bass tham 15 (15tbx100).

Can I add them to the sound or do I have phase problems, does anyone have the response curves to compare them?

as you would advise me to position them, I thought of the stacks with the bphs on the side of the stage, and the thams in the center

if the bass cannot coexist, will they play louder 8 tham 15 or 8 bhp 18?

Thanks :)

--------------------------------------------------------------------------

https://bit.ly/2VJ3dri - https://bit.ly/38rVfbc

Replies:

Posted By: Tonskulus
Date Posted: 29 June 2020 at 1:42pm

ES18bph is louder >60Hz than tham15, but tham15 will go a little lower.

I would not combine these two, but rather use only tham15 OR es18 for techno. Its up to taste.

Posted By: king david
Date Posted: 30 June 2020 at 9:35pm

You should measure the two and see how and if they Can go together. Check different filters and phase responses, set the delays and it may be doable...

-------------
http://www.warriorcharge.noblogs.org