Crown-Macrotech-MA12000i
Printed From: Speakerplans.com
Category: General
Forum Name: Amp Forum
Forum Description: The 'Stopping Jake Fielder moaning constantly' forum description...
URL: https://forum.speakerplans.com/forum_posts.asp?TID=105435
Printed Date: 19 April 2024 at 3:57am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Crown-Macrotech-MA12000i
Posted By: paulus
Subject: Crown-Macrotech-MA12000i
Date Posted: 29 June 2020 at 2:23pm
|
just wondering peoples opinion on these for sub duty , i have heard a itech 12000 running 2 b n c sw1115 drivers a channel and was certainly dishing out the sub ------------- TRENDSETTER SOUND SYSTEM |
Replies:
Posted By: Chris Grimshaw
Date Posted: 29 June 2020 at 10:21pm
|
Excellent amp. From what I can tell, it's the same amp/PSU as the ITechs, but without DSP. Pure analogue. Very clean, very powerful - what a Crown amp should be. I moved across to Powersoft for the DSP, so have an MA12000i that I could be tempted to sell. You can get in touch via my website (link below) if you're interested. Happy to throw in a couple of mains leads to get you started. Chris ------------- Quality sound from Sheffield www.grimshawaudio.com |
Posted By: levyte357-
Date Posted: 01 July 2020 at 3:27pm
|
I've heard, when they blow, almost no one can fix them..
------------- Global Depopulation - Alive and Killing. |
Posted By: FOO
Date Posted: 01 July 2020 at 3:37pm
|
Crown can fix them. But they dont blow unless you drive them way to hard.
One 12000i on 6 JBL Soundpower 749 subs. No problem for 7 hours straight. It got some muscle when it comes to driver control.
|
Posted By: smitske96
Date Posted: 01 July 2020 at 4:16pm
I have a defective Itech 8000 laying around if someone would be after parts. (unfixable says Crown service point  , and not driven hard).
|