Cubo drivers..
Printed From: Speakerplans.com
Category: Plans
Forum Name: Other plans
Forum Description: Discussion / Questions about all the other plans
URL: https://forum.speakerplans.com/forum_posts.asp?TID=105682
Printed Date: 24 April 2024 at 12:34pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Cubo drivers..
Posted By: dj jammin
Subject: Cubo drivers..
Date Posted: 07 September 2020 at 10:10pm
|
Been thinking about building some new subs and looking at the cubo designs they look really nice and simple.. few questions: has anyone simmed/tried a fane18xs in any of the cubo18s? Would this be a good driver for this box and if so which cubo would be best? standard 18, extended or sub? Also have a couple of oberton 15xb700 drivers not being used and wondering if they would be a good choice for a cubo15 and again which variation? i've heard they are good as single bass bins etc but would this design also work well in blocks of 4 or 8? Final question is there a list of compatible drivers for the cubos? Thanks for any advice or opinions ------------- Reverence Sound system |
Replies:
Posted By: dj jammin
Date Posted: 10 September 2020 at 9:18am
|
Any thoughts on the cubo designs in general? ------------- Reverence Sound system |
Posted By: djeddie
Date Posted: 10 September 2020 at 1:23pm
|
Not sure if "Mr Cubo" frequents this site, but he does seem to answer questions on the other site... freespeakerplans forum.
------------- Chas n Dave : it's like Drum and Bass but with beards. E=mc² ±3dB |
Posted By: concept-10
Date Posted: 10 September 2020 at 8:11pm
All the Cubo cabs are ok, they are also very forgiving on drivers, but don't forget to have a look at the Tham plans as well.
|
dj jammin wrote:Posted By: dj jammin
Date Posted: 10 September 2020 at 8:38pm
|
Thanks guys.. will have a look at thams.. ------------- Reverence Sound system |
Posted By: JonB67
Date Posted: 11 September 2020 at 8:10am
|
Ive been rereading about staipers cyclops cb-18, although id build the extended one. Plans for the normal on are on hornplans: http://hornplans.free.fr/cb18_cyclops.html" rel="nofollow - http://hornplans.free.fr/cb18_cyclops.html
Certainly seems like it should be in the mix! |
Posted By: shashnatiq
Date Posted: 26 December 2020 at 6:57pm
| Did you end up building them? Do they sound good with the 18XS? |
Posted By: dj jammin
Date Posted: 04 January 2021 at 2:44pm
|
Hi no I've done nothing with it so far... just haven't had the time or headspace for a while.. probably won't be doing anything til spring/summer now.. was also hoping to get some solid answers on driver suitability too... ------------- Reverence Sound system |