Is this a good Acoustical Chart for 18 Tapped Horn
Printed From: Speakerplans.com
Category: General
Forum Name: Advanced Discussion
Forum Description: Advanced discussion area for higher lifeforms
URL: https://forum.speakerplans.com/forum_posts.asp?TID=106376
Printed Date: 22 March 2023 at 3:51pm
Software Version: Web Wiz Forums 12.05 - http://www.webwizforums.com
Topic: Is this a good Acoustical Chart for 18 Tapped Horn
Posted By: Apex Predator
Subject: Is this a good Acoustical Chart for 18 Tapped Horn
Date Posted: 04 July 2021 at 7:35am
|
Is this a good chart for a 18'' tapped horn. Using an RCF G400. I'm now learning about Hornresp and trying to understand the graphs. Thanks for the help in advance
https://imgur.com/2FrJAnF" rel="nofollow - https://imgur.com/2FrJAnF
|
Replies:
Posted By: Augusts
Date Posted: 27 October 2021 at 12:22pm
|
Hi! I started my way by using the available plans for Cubo Sub. I was very impressed with the results, with a similar driver as yours also 9mm Xmax. You can find the Cubo Sub hornresp input screen copies online, input those into hornresp and then learn from a readybuilt and tested design. There are many factors you have to take into consideration when starting with hornresp and simulating speakers.
|
Posted By: snowflake
Date Posted: 27 October 2021 at 3:18pm
no. Fs of that driver is far too low
|
Apex Predator wrote:Posted By: Augusts
Date Posted: 27 October 2021 at 3:53pm
|
We have been using 18sound 18lw1400 in a cubo sub for years now, it is awesome and its fs ir 31Hz Here is a graph I did with cubo sub and the RCF , the peaks are only 0,5db higher than the sim with 18sound. Maybe there are other factors?  looks the same as 18sound
|