Print Page | Close Window

WINisd saving driver parameters

Printed From: Speakerplans.com
Category: General
Forum Name: General Forum
Forum Description: Open Discussion / Questions
URL: https://forum.speakerplans.com/forum_posts.asp?TID=106594
Printed Date: 29 March 2024 at 1:54am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: WINisd saving driver parameters
Posted By: zigzagwanderer
Subject: WINisd saving driver parameters
Date Posted: 13 October 2021 at 1:32pm
Hi 
I've been learning to use WINisd for the last couple of months , version 0.7.0.950
and I don't seem to be able to save edits to driver parameters.
I don't get an error message or anything and it looks like it has saved but the next time I use WINisd the parameters have reverted to the pre edit figures.
Am I likely to be doing somthing wrong or is this a software bug ?




Replies:
Posted By: studio45
Date Posted: 13 October 2021 at 2:32pm
Do you mean when you edit the parameters from your project window? Those changes aren't saved to the database, it's not a bug it's just the way it works. 
If you want to save new or different parameters for a driver, you have to choose "new driver" and make a new entry into the database. If your driver is already in the database, just give it a name like "xxxx V2" so you know which model is which. However, you may run into problems if WinISD's parameter checking routine doesn't think your driver is real ;)


-------------
Studio45 - Repairs & Building Commotion Soundsystem -Mobile PA


Posted By: zigzagwanderer
Date Posted: 13 October 2021 at 3:43pm
Ok that makes sense, thank you 
Yes I was trying to do it from the project window 



Posted By: DMorison
Date Posted: 13 October 2021 at 8:54pm
Rather than create a whole new driver record, you can edit the database driver records by using the "Driver Database" button and then loading the model you want to edit.
As Studio45 says, you do have to do it this way rather than in a project, as those changes would only be saved within that specific project.


Posted By: zigzagwanderer
Date Posted: 13 October 2021 at 11:11pm
Originally posted by DMorison DMorison wrote:

Rather than create a whole new driver record, you can edit the database driver records by using the "Driver Database" button and then loading the model you want to edit.
As Studio45 says, you do have to do it this way rather than in a project, as those changes would only be saved within that specific project.

Ahh yes of course 
Seems obvious now 
thanks 



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net