Print Page | Close Window

D&B A1 with B2-C0 controller

Printed From:
Category: General
Forum Name: Amp Forum
Forum Description: The 'Stopping Jake Fielder moaning constantly' forum description...
Printed Date: 29 November 2023 at 8:42am
Software Version: Web Wiz Forums 12.06 -

Topic: D&B A1 with B2-C0 controller
Posted By: 4D
Subject: D&B A1 with B2-C0 controller
Date Posted: 01 February 2022 at 11:49pm" rel="nofollow -

Just found a pile of these in a flightcase, perusing the user guide it says 2 pins of the 8 pin output connector are used to verify the correct loudspeaker for the control card is connected or the relays disconnect the outputs..

 " Speaker ID protects wrongly connected speakers from possible damage. "
Does anyone know how this works, more to the point is can it be bypassed ? 

DMZ. "The bass was intense. Girls were literally running up to stand next to the subs"

Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 -
Copyright ©2001-2023 Web Wiz Ltd. -