Electro Frying Forum - Studiolive 16.4.2

Print Page | Close Window

Studiolive 16.4.2

Printed From: Speakerplans.com
Category: General
Forum Name: Electro Frying Forum
Forum Description: Talk about drivers, processors and mixers
URL: https://forum.speakerplans.com/forum_posts.asp?TID=108433
Printed Date: 26 March 2026 at 5:30pm
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com

Topic: Studiolive 16.4.2

Posted By: smitske96
Subject: Studiolive 16.4.2
Date Posted: 25 March 2024 at 11:19am

I have a 16.4.2 mixer here currently which does not want to boot up. I only are getting a blue screen. Already checked the PSU (which measures as it should). Next stop would be the DSP board.

Has anyone have experienced the same problem? Somehow I can not post on the presonus forum..

PS: I know these mixers are getting quite old, but its just a waste to throw it away..

Replies:

Posted By: HumbleDeer
Date Posted: 19 November 2024 at 11:59pm

Check for obviously blown capacitors, which can happen through heat exposure over time. The display may come up "blue", but that's likely just the backlight. Does the display every fully turn white and/or back?

Posted By: smitske96
Date Posted: 21 November 2024 at 12:43pm

It was a cap at the firewire card in the end. But won't touch those consoled ever again after reading about that many problems and the support from presonus..