Cubo Kick 12 with 18mm
Printed From: Speakerplans.com
Category: Plans
Forum Name: Other plans
Forum Description: Discussion / Questions about all the other plans
URL: https://forum.speakerplans.com/forum_posts.asp?TID=108643
Printed Date: 26 March 2026 at 6:55pm
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com
Topic: Cubo Kick 12 with 18mm
Posted By: Hen3011
Subject: Cubo Kick 12 with 18mm
Date Posted: 23 July 2024 at 8:27am
|
Hi all my first post here so please bare with me. I have some off cuts of 18mm birch and really want to use them up. Unfortunately the cuts are just a bit small for getting a cubo kick 15 made out of them so I thought I’d do the 12s. No problem. Didn’t see until after that the cube kick 12 uses 15mm ply, not 18mm, thus changing the dimensions of the plan. I’m a proper newbie and basically wanted to know if/how I can change the plan to 18mm without effecting the final output/sound quality!?! I thought about adding the few mm difference to width and height of the box to try and keep the internal dimensions as close as possible to the original but feel like it’s all off. Is it worth changing/can it work? or should I just get some 15mm and save these bits. Thanks in advance Hen3
|
Replies:
Posted By: BrainlessTekno
Date Posted: 23 July 2024 at 8:43am
|
i wouldnt change dimensions at all, extra 3mm of wood will not make any audible difference.
There are upsides of using thicker wood, i personaly preffer 18mm wood for any cabs as its mutch better to work with ------------- BarSick / barsik soundsystem Dont want to toot my own horn but toot toot |
Posted By: Hen3011
Date Posted: 23 July 2024 at 9:16am
Thank you for your quick response. Half of me thought that would be the case. Time to get building 
|