Plan Requests - 8" mid horn plan

Print Page | Close Window

8" mid horn plan

Printed From: Speakerplans.com
Category: Plans
Forum Name: Plan Requests
Forum Description: All plan requests here
URL: https://forum.speakerplans.com/forum_posts.asp?TID=11067
Printed Date: 18 April 2024 at 2:55am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: 8" mid horn plan

Posted By: ychole audio
Subject: 8" mid horn plan
Date Posted: 28 July 2007 at 9:21pm

Anyone got plans for 8" mid horn?Thank you very much.

-------------
I am ZERIEL'S dad!!!

Replies:

Posted By: tb_mike
Date Posted: 29 July 2007 at 9:47pm

http://www.centauriaudio.com.au/diy/ -

A simple conical horn with the correct cutoff/mouth size could be an option.

http://www.centauriaudio.com.au/diy/

Posted By: ychole audio
Date Posted: 29 July 2007 at 10:40pm

Thanks!Nice design & looks good too.Lots of woodworking tho!!

-------------
I am ZERIEL'S dad!!!

Posted By: moray james
Date Posted: 30 July 2007 at 6:44am

Check out what Adrian did with the somewhat smaller driver. Easy to build and should give you good results. You can scale the design up to fit an eight inch driver.

http://www.geocities.com/adrian_mack/homepage.html - http://www.geocities.com/adrian_mack/homepage.html

-------------
moray james

Posted By: TONY.A.S.S.
Date Posted: 30 July 2007 at 8:41am

I think a small mid horn may be easier than you think. One approach could be to decide the length, i.e. throw. Decide how wide you want the box to be. Then decide your angle of dispersion. This will give you your termination angles. Make the throat smaller than the piston diameter. All you have to do now is fill in with two lines 1 for vertical 1 for horizontal. If you need to squeeze hi end out, keep the throat fairly tight. A faster flair rate from the throat will give you a more mellow sound. For our own use, we build fibreglass 8" mid horns. Once you have built the first horn, If your happy, it's easy to make a mould out of it and do them in glass. Only a thought.

-------------
http://www.facebook.com/tony.rossell.3" rel="nofollow - http://www.facebook.com/tony.rossell.3

Posted By: Mark James
Date Posted: 30 July 2007 at 11:07am

tony that was inspiring..........
i learn a little more every day,
cheers [again]
markk

-------------
me so horny me love you long throw
horn loaded for her pleasure