X10, X12, X15 and XM15 - X15 plan problem ?

Print Page | Close Window

X15 plan problem ?

Printed From: Speakerplans.com
Category: Plans
Forum Name: X10, X12, X15 and XM15
Forum Description: Discussion / Questions about the X10, X12, X15 and XM15
URL: https://forum.speakerplans.com/forum_posts.asp?TID=14363
Printed Date: 27 March 2026 at 5:30am
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com

Topic: X15 plan problem ?

Posted By: stephenwconcannon
Subject: X15 plan problem ?
Date Posted: 03 February 2008 at 6:07pm

the large blue brace on the plan doesnt look right to me, how can the brace come to the front of the box? the driver would be in the way...

Replies:

Posted By: Jhodas
Date Posted: 03 February 2008 at 9:50pm

It's above the driver. If you're worried about it extend the front, side and rear panels 10-20 mm, keeping the port, top and bottom the same.

-------------
Until the Lions have their own historians, tales of hunting will always glorify the hunter.

Posted By: angus
Date Posted: 09 February 2008 at 6:38pm

Can anyone send me a link to the plan please?

I'm finally getting round to bracing my x15s ahead of using them above 50W i.e. out and about in earnest for gigs, and I would like to check a couple of measurements and brace placement suggestions (also the alternative drivers) but the main speakerplans site is down still :(

Thanks,

Angus

-------------
They're complaining over there, but it's their fault!

Posted By: Jake_Fielder
Date Posted: 11 February 2008 at 1:45pm

http://www.speakerplans.com/page4.html - http://www.speakerplans.com/page4.html

Posted By: Jake_Fielder
Date Posted: 11 February 2008 at 1:48pm

The old bits of the site still work....

http://www.speakerplans.com/page3.html - www.speakerplans.com/page3.html is sub plans

http://www.speakerplans.com/page2.html - www.speakerplans.com/page2.html is horn plans

EDIT: bum links

Posted By: angus
Date Posted: 11 February 2008 at 2:07pm

Ta - I actually found it http://www.speakerplans.com/images/x15.jpg - here having posted same query in general forum

-------------
They're complaining over there, but it's their fault!

Posted By: angus
Date Posted: 11 February 2008 at 2:07pm

Oh, and I can confirm using the bmd450 on the 220 horn with the sn15mb no fouling will accur if you follow the plans!

-------------
They're complaining over there, but it's their fault!