X1 - x1 orientation

Print Page | Close Window

x1 orientation

Printed From: Speakerplans.com
Category: Plans
Forum Name: X1
Forum Description: Discussion / Questions about the X1 sub
URL: https://forum.speakerplans.com/forum_posts.asp?TID=1850
Printed Date: 19 April 2024 at 8:00am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: x1 orientation

Posted By: simon
Subject: x1 orientation
Date Posted: 12 May 2005 at 5:42pm

We're putting 4 x1 cabs in each stack, and want to know if it is better to have them standing up on end next to each other or lying down, 2 on top of the other 2.
we would like to stand them up, so we can put 2 hd15 cabs on top of each x1. we can than get enough height to put our mid tops on.
if we should put them 2 on 2, should the cones all face the same way, or in opposite directions,

or does it make no difference.

Replies:

Posted By: LunchieTey
Date Posted: 12 May 2005 at 7:32pm

Prolly makes little difference. My 6th order boxes(very similar to x1) don't seem to sound any different either way. Theoretically it would be better to have the ports as close to the ground as possible for total 'half-space' loading,but should still be fine,stack 'em how you like!

-------------
Speaker addict

Posted By: Mal X
Date Posted: 15 May 2005 at 6:57pm

rog once told me to put the ports on the ground then the low ports touching each other as well.

-------------
Mal, how loud was that!!!!!!