1850 copy???
Printed From: Speakerplans.com
Category: General
Forum Name: Feedback Forum
Forum Description: How Your Projects Perform
URL: https://forum.speakerplans.com/forum_posts.asp?TID=18839
Printed Date: 18 April 2024 at 10:20pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: 1850 copy???
Posted By: Hi_Varu
Subject: 1850 copy???
Date Posted: 08 August 2008 at 5:04pm
Look at this...c4 copy and 185/186??? http://www.highlite.nl/index.php/highlite/silver.econtent/catalog/highlite/dap_audio/speakers/concert_series |
Replies:
Posted By: adambomb
Date Posted: 08 August 2008 at 6:03pm
|
blimey.. that's blatant! ------------- http://www.freespeakerplans.com" rel="nofollow - www.freespeakerplans.com |
Posted By: rich_gale
Date Posted: 08 August 2008 at 6:07pm
| i wouldnt worry. the idiots at DAP will probably have made it from chipboard and loaded it with a jensen guitar driver. not once have i seen a product from DAP done right. |
Posted By: pfly
Date Posted: 22 August 2008 at 8:49pm
|
http://www.erikasound.com/ProductsView_e.asp?id=88 - http://www.erikasound.com/ProductsView_e.asp?id=88 That's what's in there... Doesn't look too promising. Shame they don't list any specs or parameters... |
Posted By: pfly
Date Posted: 22 August 2008 at 8:58pm
| Oh and it's nice how honest they are with frequency response, not telling it to perform down to 30hz flat... Dunno about it with that driver... |
Posted By: Spesh
Date Posted: 22 August 2008 at 9:10pm
Oh dear  ------------- Symmetry Soundsystem |
Posted By: pfly
Date Posted: 22 August 2008 at 9:17pm
| It is actually suprising how few speakerplans.com far east -copies there is. |
Posted By: Spesh
Date Posted: 22 August 2008 at 9:19pm
|
Would be nice to know how closely the the horn itself resembles that of the 1850.......Can't be vastly different tho. ------------- Symmetry Soundsystem |
Posted By: pfly
Date Posted: 23 August 2008 at 10:49am
| Yea. And how much the amp module has eaten from the back chamber... |
Posted By: tallmike
Date Posted: 23 August 2008 at 6:27pm
|
I suppose imitation is a form of flattery!
I've seen various companies peddling LAB subs.
|
Posted By: tomschute
Date Posted: 26 August 2008 at 9:02pm
 ...?
------------- Out to lunch... stableaudio@hotmail.co.uk www.stableaudio.co.uk Speaker Building Services |
Posted By: sKs01
Date Posted: 26 August 2008 at 9:25pm
|
i wouldntve thaught its that surprising the labs got copied, tom danley is a big name in a small world ------------- You're a big man, but you're in bad shape. With me it's a full time job. Now behave yourself. |
Posted By: tallmike
Date Posted: 28 August 2008 at 10:58am
|
of course, that wharfedale's not a Lab Sub Copy, but isn't it a rip off of an old Cerwin Vega thing? (having never seen any of the SP plans/bins)
Mike
|
Posted By: pfly
Date Posted: 29 August 2008 at 4:06pm
| That looks just like a CV bin |
Posted By: paulus
Date Posted: 30 August 2008 at 12:33pm
i heard a pair of these and the driver lets it down could here it bouncing of the back plate at around 800w,nasty flapping sound but the cab was holding up,be ok if u could get 2 empty ones for pea nuts and 1850 load them,might blow it to bitd though ha ha !!!!1 ------------- TRENDSETTER SOUND SYSTEM |
Posted By: mobiele eenheid
Date Posted: 01 September 2008 at 1:15pm
|
According to the specs on the site, it's about 35% bigger than a 1850 horn. Tho clearly based upon it, it must be quite different in some aspects. Based upon the double stacked magnet I would suppose the rear chamber is much larger. Regards Johan
|
Posted By: pfly
Date Posted: 01 September 2008 at 10:08pm
| Maybe it's just made deeper to accompany the amplifier? |