<<:::::: Show off your Funktion-One ::::::>>
Printed From: Speakerplans.com
Category: General
Forum Name: Show Off Your Sound System
Forum Description: Show of your gear. Post pictures of your Sound System here...
URL: https://forum.speakerplans.com/forum_posts.asp?TID=19154
Printed Date: 26 March 2026 at 4:57pm
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com
Topic: <<:::::: Show off your Funktion-One ::::::>>
Posted By: simo69
Subject: <<:::::: Show off your Funktion-One ::::::>>
Date Posted: 21 August 2008 at 9:02pm
|
====== Funktion-One Porn ======
http://images.google.co.uk/images?ndsp=20&um=1&hl=en&q=funktion-one&start=0&sa=N" rel="nofollow - http://images.google.co.uk/images?ndsp=20&um=1&hl=en&q=funktion-one&start=0&sa=N Crossover settings*** Res3 Mk2 settings added Oct 2011 *** *** PSM12 Added August 2011 *** *** Res3 + F221 Added Nov 2010 *** *** Res3 + Sub Time Alignment tweeked! *** *** Res5 Cluster Downfill Delays Added Nov 2010 *** *** Res4 and Res5 time alignment settings updated January 2009 ***
LR = Linkwitz Riley |
Replies:
Posted By: Soundboy20
Date Posted: 21 August 2008 at 9:22pm
|
Glad to see there are some pic's of mine up there!
Rex ------------- RCH Audio Engineering www.rchaudioengineering.co.uk |
Posted By: simo69
Date Posted: 21 August 2008 at 9:24pm
| Still got your BSS355 rex.. looking for some XTA's now to go with my FFA's...? |
Posted By: simo69
Date Posted: 21 August 2008 at 9:28pm
| what page are yours on rex |
Posted By: boycey
Date Posted: 21 August 2008 at 9:52pm
if you add porn to the search you get more users sound systems that strangely include no funktion one  http://images.google.co.uk/images?ndsp=20&um=1&hl=en&safe=off&q=funktion-one+porn&start=0&sa=N - http://images.google.co.uk/images?ndsp=20&um=1&hl=en&safe=off&q=funktion-one+porn&start=0&sa=N ------------- the only thing more dangerous than a person who doesn't give a f**k is a person who gives a sh*t. |
Posted By: wafflesomd
Date Posted: 21 August 2008 at 9:56pm
| My funktion one? I wish.... |
Posted By: simo69
Date Posted: 21 August 2008 at 10:01pm
| Dom's on this page.. http://images.google.co.uk/images?ndsp=20&um=1&hl=en&safe=off&q=funktion-one+porn&start=40&sa=N - http://images.google.co.uk/images?ndsp=20&um=1&hl=en&safe=off&q=funktion-one+porn&start=40&sa=N |
Posted By: the smf
Date Posted: 21 August 2008 at 11:19pm
| bit of a waste thread, mite aswell of just gone on google |
Posted By: Dom
Date Posted: 21 August 2008 at 11:22pm
|
Strange that a picture of my old rig from time ago comes up on a search for F1 porn, when pictures of my big piles of F1 don't... ------------- "It sounded like a million fire engines chasing ten million ambulances through a war zone and it was played at a volume that made the empty chair beside me bleed." |
Posted By: simo69
Date Posted: 21 August 2008 at 11:27pm
 ... come on Dom let's have a look then..!!! pic's please..
|
Posted By: SteveAATW
Date Posted: 21 August 2008 at 11:54pm
    |
Posted By: FarmerWardy
Date Posted: 22 August 2008 at 12:45am
|
boycey wrote:Posted By: simo69
Date Posted: 22 August 2008 at 12:11pm
| Whats what the R1's sound like Steve?? |
Posted By: SteveAATW
Date Posted: 22 August 2008 at 3:41pm
| Sweet like chocolate |
Posted By: sKs01
Date Posted: 23 August 2008 at 10:45pm
|
is that rack of mc2 liftable or not, i know their light but thats an awfull lot of em... install perhaps? ------------- You're a big man, but you're in bad shape. With me it's a full time job. Now behave yourself. |
Posted By: chickenfizz
Date Posted: 24 August 2008 at 12:24am
|
6 of those are heavey amps (T series and MC series), the labs and the 'E' amps are the only 'light' ones in that rack, therefore it will be a pretty much unmovable rack. As a semi-interesting sidenote, I just swapped some amps around in an install, a crest 9001 which was running 2x F218 bins a side went bang (again!) so I have temporarily put an E45 in and the sound is loads better, the bass just sounds loads softer and warmer, the bins even seem like they're going lower now although I'm certain they won't be. I have A-B tested a few different amps on 4x f218s, whilst not as powerfull as the crest or E45 a lab gruppen fP3400 did sound very nice. The worst amp by far that I tried was QSC PLX3402, the amp just couldn't hack it, kept going into protect or reducing the output considerably to protect itself. This amp cannot drive these speakers even several dB below it's rated maximum power at 2R, I'd never want to drive one of these at 2 ohms again after that experience. The crest 9001 is the next worst IMO, they certainly are very powerful but sound 'hard' and 'cold' to me, also they weigh 50kg, generally I like heavey amplifiers but 50kg is ridiculous, I struggle to lift one onto a table myself unracked. You could get 5 x E45s and it'd be a similar weight to a 9001! I haven't tested a crown MA 500*VZ but I'd very much like to. Sometime I'll probably try an Infinite 8 v2 too as I have a friend with one. Sorry for the slight thread hijacking I got carried away! |
Posted By: SteveAATW
Date Posted: 24 August 2008 at 5:52am
It's bolted to the floor and has about 40 fairly taught cables going through holes in the back of the rack and floor into the floor below, your welcome to try though |
Posted By: the smf
Date Posted: 24 August 2008 at 8:30am
| just noticed the mismatched cdj's in those pics, lol |
Posted By: Caeraphym
Date Posted: 24 August 2008 at 12:42pm
|
Wtf? Two Pioneers, and what looks like a defunct Denon controller is all I see. Am I being fick, cos if so please help me see the light of your wisdom. |
Posted By: the smf
Date Posted: 24 August 2008 at 1:30pm
| look closely, cdj1000 mk2 on left, mk3 on the right |
Posted By: Ben_Lawrance
Date Posted: 24 August 2008 at 1:35pm
|
I think it's a tad on the comical side how the picture shows pro gear (F1, D&B, Pioneer, MC2 etc) and is using a Berry DCX.
LOL.
|
Posted By: bitcore
Date Posted: 24 August 2008 at 2:01pm
We all have our budgets! ------------- http://bitcore.org/stuff/Bass_Tones/ - Bass Tones & Sweeps in 160kbit MP3 http://youtube.com/watch?v=mC9XqmyKaOY - I<3bass 
|
Posted By: sKs01
Date Posted: 24 August 2008 at 2:55pm
|
spending the money in the right places is what counts, not just going for the name every time... ------------- You're a big man, but you're in bad shape. With me it's a full time job. Now behave yourself. |
Posted By: SteveAATW
Date Posted: 24 August 2008 at 6:27pm
It's on the DJ monitors - A/B'd it against the 2 DP226's and DP6i that are running the rest of the rig and you can't hear any difference  |
Posted By: Dom
Date Posted: 26 August 2008 at 5:21pm
Slightly smaller and more portable amp rack....
 ------------- "It sounded like a million fire engines chasing ten million ambulances through a war zone and it was played at a volume that made the empty chair beside me bleed." |
Posted By: SteveAATW
Date Posted: 26 August 2008 at 10:21pm
Phwoar  Wonder if the threads resident audio snob is going to complain that its not a 4 series DP  |
Posted By: Sims Audio Systems
Date Posted: 26 August 2008 at 11:08pm
|
Dave Millards pile at sanch panza.. http://img360.imageshack.us/my.php?image=24082008421bf5.jpg - http://img360.imageshack.us/my.php?image=24082008421bf5.jpg
|
Posted By: michelvandebeek
Date Posted: 28 August 2008 at 9:59pm
Phwoar  |
Posted By: simo69
Date Posted: 13 October 2009 at 8:48pm
|
Posted By: vectif
Date Posted: 13 October 2009 at 8:58pm
|
whether people like the sound or not, I have to admit on asthetics alone I do really like all of the function one kit. It has an appeal that it is so in your face, but its not... Also on that note, I have to confess again on asthetics only I do like the packaging around FFA amps too.  ------------- I feel a storm is brewing... |
Posted By: jonminns
Date Posted: 13 October 2009 at 9:09pm
Pick it out blind and then i'll call you a 'pro'
|
Posted By: simo69
Date Posted: 13 October 2009 at 9:47pm
|
Posted By: decibel audio
Date Posted: 13 October 2009 at 11:34pm
|
lets a have a void one then ------------- Derek Dunphy |
Posted By: decibel audio
Date Posted: 13 October 2009 at 11:38pm
| steve when have a lovely amp rack without the OW1 |
Posted By: jacethebase
Date Posted: 14 October 2009 at 11:17am
|
1 ------------- www.wedding-production.co.uk www.stage2sound.com |
Posted By: jacethebase
Date Posted: 14 October 2009 at 11:22am
|
I must admit i did like the amp rack of mc2's & labs then the berry! Didnt like to say anything before as ive never used one so dont want to judge it. ------------- www.wedding-production.co.uk www.stage2sound.com |
Posted By: jacethebase
Date Posted: 15 October 2009 at 10:46pm
http://www.facebook.com/photo.php?pid=8906461&id=514605067"> ------------- www.wedding-production.co.uk www.stage2sound.com |
Posted By: jacethebase
Date Posted: 15 October 2009 at 10:46pm
http://www.facebook.com/photo.php?pid=8906461&id=514605067"> ------------- www.wedding-production.co.uk www.stage2sound.com |
Posted By: jacethebase
Date Posted: 15 October 2009 at 10:47pm
http://www.facebook.com/photo.php?pid=1538294&id=514605067"> ------------- www.wedding-production.co.uk www.stage2sound.com |
Posted By: jacethebase
Date Posted: 15 October 2009 at 10:50pm
http://www.facebook.com/photo.php?pid=1538303&id=514605067"> ------------- www.wedding-production.co.uk www.stage2sound.com |
Posted By: jacethebase
Date Posted: 15 October 2009 at 10:53pm
http://www.facebook.com/photo.php?pid=8906445&id=514605067"> ------------- www.wedding-production.co.uk www.stage2sound.com |
Posted By: subbass
Date Posted: 16 October 2009 at 2:59am
|
did i spot some res9s there? b*stards of cabs!
|
Posted By: mykey
Date Posted: 16 October 2009 at 6:34am
http://img113.imageshack.us/i/95212689361400675146050.jpg/"> not a bass face intheplace ------------- ......just all them hanging there like giant bananas. |
Posted By: jacethebase
Date Posted: 16 October 2009 at 10:47am
|
Yeh knock used to have some res 9's they have moved on to better things god knows where! Funny you should put "wonder what time the bus will be here" as after this event there was ment to be a bus shipping punters to the opera house but the promoters canceled it due to lack of funds! ;) ------------- www.wedding-production.co.uk www.stage2sound.com |
Posted By: Bad Man Moriarty
Date Posted: 25 March 2010 at 2:15pm
http://s143.photobucket.com/albums/r149/ciaran_bucket/?action=view¤t=DSCF2238.jpg"> http://s143.photobucket.com/albums/r149/ciaran_bucket/?action=view¤t=DSCF2248.jpg">  http://s143.photobucket.com/albums/r149/ciaran_bucket/?action=view¤t=DSCF2257.jpg">  |
Posted By: Bryan M
Date Posted: 25 March 2010 at 8:01pm
One of my friends bought some of them, they are something else, going to give him a hand doing the whole lot up over the next few months so they look like new again as i think knocker worked them hard |
Posted By: philw44
Date Posted: 25 March 2010 at 8:34pm
|
I heard a F1 system for first time a few weeks ago. Severely underwhelmed :/ |
Posted By: Saul
Date Posted: 25 March 2010 at 8:41pm
|
who was engineering it? there's seems to be this myth that they just sound good cos its F1 i completely disagree - it also needs the right engineering
|
Posted By: VPAS
Date Posted: 25 March 2010 at 8:55pm
|
id say even more so with F1 then others ------------- n^2 modulo -P = number wang |
Posted By: philw44
Date Posted: 25 March 2010 at 9:07pm
|
It was an Autechre DJ Set at Pure in Manchester. Room seemed pretty nice sounding so no excuses there. I believe the set-up was: 3 x F215's and 3 x Res 2 or 3 per side Low end was pathetic - no real definition and no chest thumping low. Didn't feel like there was much below about 50hz? Mid/tops were better. Although they have this very 'squashy' sounding characteristic to them. (Can't think of a better word for it) And yes i agree it does depend a bit on the engineering, but yknow - it was a simple setup. Not a great deal you can balls up on... or is there? |
Posted By: Bad Man Moriarty
Date Posted: 25 March 2010 at 9:17pm
| there is plenty that you could do wrong tho isnt there! |
Posted By: Spesh
Date Posted: 25 March 2010 at 9:36pm
I would hazard a guess that it was an engineering fault (yes there is plenty that can be done wrong, even with a basic setup)
F1 properly engineered sounds superb. Resolution has a very distinctive "dry" sound. Very similar to a good studio monitor. ------------- Symmetry Soundsystem |
Posted By: Ray
Date Posted: 25 March 2010 at 9:52pm
|
I have heard countless f1 systems over a good few years and have never really been that taken. when run correctly it all sounds very precise, balanced and 'f1 sounding' but that 'f1 sound' just isn't my cup of tea. Doesn't excite me, way to pricey and overrated. no guts, just a pretty face (the double 21 bins may be an exception)
|
Posted By: Danny A
Date Posted: 25 March 2010 at 10:14pm
^^
|
Posted By: pfly
Date Posted: 25 March 2010 at 10:26pm
|
F1, Void and such systems need quite a bit good engineering to make them them sound right, as opposed to D&B, Meyer and other "closed" systems where most Xovering and stuff like that has been taken care already. Getting that famous mid range clarity and resolution F1 is known for, without making the mid sound too much "in your face" or honky may turn out to be quite a challenge, at least based on those F1 systems I've heard and my own experience with horn loaded midtops requiring active Xovering (Mostly Stasys 3 Mk2, some Martins and old Cerwin Vegas with Xover removed). The Xover, EQ and delay settings that the manufacturers give out may not be the right ones in every situation and venue, however, the engineer REALLY needs to know what he/she is doing before making big changes. |
Posted By: Bad Man Moriarty
Date Posted: 27 March 2010 at 1:09pm
 found this in the morning  |
Posted By: cravings
Date Posted: 27 March 2010 at 1:28pm
|
that's legend!
|
Posted By: rich, ind.st
Date Posted: 27 March 2010 at 3:31pm
i was at that gig, absolutely shocking, res 3's arrayed improperly, no low mid & some undefined wallowy bass. certainly not a good example of what funktion is capable of. engineer looked completely disinterested ------------- music is god |
Posted By: Danny A
Date Posted: 27 March 2010 at 6:33pm
| I didnt think anyone had any res 3 yet, just prototype |
Posted By: philw44
Date Posted: 27 March 2010 at 7:19pm
Hey man, thanks for replying. Glad i'm not the only one who thought it was lacklustre! In all honesty, i was trying to have fun and enjoy the night rather than be a geek about the system. How was it arrayed incorrectly? I didn't notice... System sounded pretty consistent throughout the night so definitely no error on the performers side. |
Posted By: Saul
Date Posted: 27 March 2010 at 7:43pm
was that at henrys bar?
|
Posted By: Tiff
Date Posted: 28 March 2010 at 7:36pm
|
i bet £100 that it wasnt me or s dexter of here when we were drunk
|
Posted By: Saul
Date Posted: 28 March 2010 at 8:24pm
|
Posted By: Bjørn Dub
Date Posted: 28 March 2010 at 10:51pm
 Our little reggae festival.. sadly it is no more..  ------------- 1850 FRB C. (; |
Posted By: Bjørn Dub
Date Posted: 28 March 2010 at 11:24pm
 Anyone recognise this particular setup? Its for sale at a danish sound company.. ------------- 1850 FRB C. (; |
Posted By: Saul
Date Posted: 28 March 2010 at 11:29pm
| looks like the upper part of the dance stack with 218s below. |
Posted By: jazomir
Date Posted: 29 March 2010 at 10:24am
|
It's a standard DS1 Dance stack comprising DS210, D15, 3xF218. F1 configs in PDF format can be found on the F1 site under products/Dance Stack Range/Dance Stack Overview/Spec Sheet/Option c DS Configurations.
------------- For sidefills, can we have two enormous things of a type that might be venerated as Gods by the inhabitants of Easter Island, capable of reaching volumes that would make Beelzebub soil his pants. |
Posted By: Bjørn Dub
Date Posted: 29 March 2010 at 10:43am
|
I can see what it is, thank you.. thats why I aks if anyone have seen this particular setup.. Im wondering what the guy at the local company whos selling these are up to. B ------------- 1850 FRB C. (; |
Posted By: dubgoat
Date Posted: 01 April 2010 at 10:13am
|
Posted By: Strange Daze
Date Posted: 01 April 2010 at 2:46pm
Been there, and it sounded stonking. they wern't DJing with MP3s were they? lol |
Posted By: aaronswp
Date Posted: 02 April 2010 at 11:18pm
|
       |
Posted By: toastyghost
Date Posted: 03 April 2010 at 12:02am
|
All the bass seems to have blasted the fat off that poor girl's bones in that last pic.
Genuine question, is every single one of those cabs yours or were some obtained through the hire network? |
Posted By: aaronswp
Date Posted: 03 April 2010 at 3:30pm
| not mine personally but yes they r audio funktions from bloc |
Posted By: biotec
Date Posted: 04 April 2010 at 9:30am
|
8 stacks of res5/218 were on dry hire from KSS ------------- me so horny, me love you long throw. |
Posted By: jbl_man
Date Posted: 04 April 2010 at 12:36pm
Just noticed the carpet in this one.you would feel drunk just looking at that. ------------- Be seeing you. |
Posted By: Bad Man Moriarty
Date Posted: 04 April 2010 at 1:54pm
| i didnt really get a chance to notice how well x2 res4s kept up with 6 bins. overkill on the sub? |
Posted By: dj-panoramix
Date Posted: 05 April 2010 at 3:33pm
dj monitoring ?
|
Posted By: toastyghost
Date Posted: 06 April 2010 at 2:11am
About right in my opinion? |
Posted By: bass*en*mass
Date Posted: 06 April 2010 at 5:58am
|
yeah 30% discount on gods thoughts, once in a lifetime bargain, but no one cares...
ban it!
|
Posted By: Bad Man Moriarty
Date Posted: 06 April 2010 at 6:09pm
| i only have 2 f121s per 2 res 4's a side im thinking i need another 2 a side for most of the hire's we've been doing. I just dont want to end up missing the kick. i have e's not t's so i cannot go 2 high |
Posted By: toastyghost
Date Posted: 06 April 2010 at 6:23pm
Well the 'kick' is around 90Hz so it should be coming out of your F121s anyway? I'm not sure how hard that stack at BLOC was being run but the balance seemed to be fine to my ears. The Res4 is a pretty loud cabinet. |
Posted By: Saul
Date Posted: 06 April 2010 at 6:29pm
|
but last year there was ambisonics at bloc. not this year apparently
|
Posted By: Bad Man Moriarty
Date Posted: 06 April 2010 at 9:31pm
| okay say im worried about missing things above 120hz ? is it recommended 4 for 2? |
Posted By: toastyghost
Date Posted: 07 April 2010 at 1:31am
To be honest, I think Funktion One themselves may be best poised to answer that question from experience, but as I've said I found 6 F121s to 2 Res4 to be a good match when I've heard it. I regularly go to a club with a pair of F221s and 4 flown Res4 skeletals and it's incredibly top heavy. The back room has 3 F121 stacked vertically and it's just about enough bass to keep up with the 6 or so Res1 flown around the relatively small room, however I think that's mostly down to really poor positioning and stacking arrangement. |
Posted By: Bryan M
Date Posted: 07 April 2010 at 2:08am
12 121 were hired from audio x too |
Posted By: Dom
Date Posted: 07 April 2010 at 6:39am
|
And I sent 10 F218... ------------- "It sounded like a million fire engines chasing ten million ambulances through a war zone and it was played at a volume that made the empty chair beside me bleed." |
Posted By: Bad Man Moriarty
Date Posted: 07 April 2010 at 10:00am
|
thanks! I think your proberbly right at least another 2 f121's per side would do the trick! im having the run our bins quite hard to cope with dubstep/drum and bass etc. would be nice to have the headroom! thanks for your help ciaran |
Posted By: dan
Date Posted: 10 April 2010 at 3:09pm
Found these on facebook...     |
Posted By: Ben_Lawrance
Date Posted: 10 April 2010 at 3:56pm
Hmmmmmm............ There is a wide dispersion R9 next to a narrow dispersion R9.
Interesting way to set it up?
|
Posted By: jacethebase
Date Posted: 10 April 2010 at 4:03pm
|
God those things are awkward! Lovely sounding box's especialy for edm. ------------- www.wedding-production.co.uk www.stage2sound.com |
Posted By: iNDiSCREETAK
Date Posted: 10 April 2010 at 11:20pm
|
That was New Years Eve @ Motion in Bristol. That was a night to remember for sure ------------- iNDiSCREET FESTiVAL - www.facebook.com/indiscreetfestival |
Posted By: Phil B
Date Posted: 11 April 2010 at 7:44am
Pretty standard , Narrow dispersion on the outside and wide to cover inbetween the stacks? Or variations of the theme depending on what you want to cover??  .p. ------------- Mostly harmless.... except if catering is shut. Solar Sound System Shennanigans.. http://diyhifi.biz/" rel="nofollow - http://diyhifi.biz/ |
Posted By: Ibex
Date Posted: 11 April 2010 at 11:50am
| http://tribes.tribe.net/funktionone/photos - http://tribes.tribe.net/funktionone/photos |
Posted By: dan
Date Posted: 11 April 2010 at 5:00pm
| Yeah as Phil said wide dispersion on inside to cover in between stacks, or you can put wide dispersion on the outside of stack or both.. |
Posted By: AUDIO HABIT
Date Posted: 11 April 2010 at 8:58pm
 some nice pics there------------- https://www.facebook.com/fxstageproductions |
Posted By: Tom Tapey
Date Posted: 12 April 2010 at 6:02pm
Posted By: Tom Tapey
Date Posted: 12 April 2010 at 6:21pm
  A couple of pics from the pack down at Bloc.
|
Posted By: S DeXter
Date Posted: 19 April 2010 at 12:33pm
Supplied without a rack? Heres some gold ones for ya... (yes they've been on before)....  ------------- Enjoy your self...... It's later than you think....... |
Posted By: simo69
Date Posted: 19 April 2010 at 2:05pm
http://www.facebook.com/photo.php?pid=258710&id=110809078930946">
|
Posted By: MarjanM
Date Posted: 20 April 2010 at 7:15pm
That is a very skinny cheek :-) ------------- Marjan Milosevic MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |