X1 - X1 orientation

Print Page | Close Window

X1 orientation

Printed From: Speakerplans.com
Category: Plans
Forum Name: X1
Forum Description: Discussion / Questions about the X1 sub
URL: https://forum.speakerplans.com/forum_posts.asp?TID=19597
Printed Date: 26 March 2026 at 8:27pm
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com

Topic: X1 orientation

Posted By: minns25
Subject: X1 orientation
Date Posted: 10 September 2008 at 7:17pm

Does it matter which way the x1 is used?

Ie. lower tuned port to the floor (port horizontally) or both ports vertical?

I'm finishing a cab tomorrow and need to know where to put feet/top hat

Cheers

Jon

Replies:

Posted By: adambomb
Date Posted: 10 September 2008 at 8:16pm

Both ports vertical is the way it was designed to be used.

-------------
http://www.freespeakerplans.com" rel="nofollow - www.freespeakerplans.com

Posted By: minns25
Date Posted: 10 September 2008 at 9:22pm

Does it make that much of a difference?

Jon

Posted By: Deadbeat
Date Posted: 10 September 2008 at 9:27pm

Rog designed it to be placed that way - it has to do with the virtual extension offered by the floor's end correction.

i'd just put the top hat on the sides and wheels acesspanel side.

-------------
Away on extended leave.

Posted By: minns25
Date Posted: 10 September 2008 at 9:47pm

Yeah thats why i thought the low tuned port was extended by the floor, as its all touching, as opposed to just a small amount of 2 ports...

So handles above & below driver, wheels on back, tophat on side

Jon