Print Page | Close Window

Which Re-Cone Glue

Printed From: Speakerplans.com
Category: General
Forum Name: Advanced Discussion
Forum Description: Advanced discussion area for higher lifeforms
URL: https://forum.speakerplans.com/forum_posts.asp?TID=19678
Printed Date: 19 April 2024 at 11:09am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Which Re-Cone Glue
Posted By: ashdosseposse
Subject: Which Re-Cone Glue
Date Posted: 14 September 2008 at 3:03pm
Hi
can anyone tell me the glue to use to re-cone some drivers

-------------
If i had eyes and teeth i'd be a whole head! [Memoirs of an Invisible Man]



Replies:
Posted By: Dom
Date Posted: 14 September 2008 at 4:12pm
It really depends on the driver.  Some drivers need more assembly than others and require different types of glue for different stages.

-------------
"It sounded like a million fire engines chasing ten million ambulances through a war zone and it was played at a volume that made the empty chair beside me bleed."


Posted By: ashdosseposse
Date Posted: 14 September 2008 at 10:53pm
B & C 18" sub and some Beyma 10" mids

-------------
If i had eyes and teeth i'd be a whole head! [Memoirs of an Invisible Man]


Posted By: CHAMPION
Date Posted: 15 September 2008 at 8:20am

http://www.loctiteproducts.com/ - http://www.loctiteproducts.com/

Use different types of adeshives on dofferent parts on the re-cone procedure. If your not sure speak to one of the manufactures, Fane,B&C, etc for advice.
 


-------------
Sticks n Stones


Posted By: ashdosseposse
Date Posted: 15 September 2008 at 11:43am
Well i had one type of glue for bonding off beyma which looked like evostik plus some pva for the surround

-------------
If i had eyes and teeth i'd be a whole head! [Memoirs of an Invisible Man]


Posted By: nickyburnell
Date Posted: 15 September 2008 at 10:15pm
What kit was it though? If the coil is already attached to the cone then you don't need that glue. Your answers are here
http://www.freespeakerplans.com/forum/forum_posts.asp?TID=505 - http://www.freespeakerplans.com/forum/forum_posts.asp?TID=505
 
I use an ACTIVATED super glue for the dust caps.
 
Nick
 


-------------
It's everything, not everythink!


Posted By: ashdosseposse
Date Posted: 15 September 2008 at 11:11pm
new cones with the coil fitted... i want glue for the surround

-------------
If i had eyes and teeth i'd be a whole head! [Memoirs of an Invisible Man]


Posted By: Pinheiro
Date Posted: 16 September 2008 at 8:34am
hi

i done recone on more then 200 recones  from DAS, PD(turbosound),JBL,RCF and more  and the glue is always this
http://www.bartolos.pt/store/files/cola_de_contacto%5B1%5D.jpg

hope it helps yours Vitor Pinheiro


Posted By: CHAMPION
Date Posted: 16 September 2008 at 10:06am
lol Coke cola
 
Try getting some of this stuff, im trying to source it ....
 
http://www.soundspeakerrepair.com/speaker-parts-cp/RS-3087/Supplies/Supplies/ - http://www.soundspeakerrepair.com/speaker-parts-cp/RS-3087/Supplies/Supplies/
 
best stuff, looks like only made in USA !
 


-------------
Sticks n Stones


Posted By: nickyburnell
Date Posted: 16 September 2008 at 10:33am
Wembley LS use Tretobond

-------------
It's everything, not everythink!


Posted By: ceharden
Date Posted: 16 September 2008 at 3:13pm
Myself and many other people use an impact adhesive by Evostick or Bison for gluing the spider and surround to the chassis.  Just make sure you get it in place first time!!!


Posted By: Centauri
Date Posted: 16 September 2008 at 4:05pm
For spiders / surrounds / dust caps I use http://www.bostik.com.au/technical_data_sheets_PDF/Bostik_Fix_It_Once_Multi_Bond.pdf - Bostik MultiBond , but I can't see that on the Bostik UK website - may be similar to their Evostik Serious Glue but not sure.  I wouldn't use a contact adhesive for this.


Posted By: CHAMPION
Date Posted: 16 September 2008 at 4:21pm
http://imageshack.us">
 
A few PD Voice coils we reworked after Carnival  5" Dia 2.5cm coil width Well Done !
 
 
http://imageshack.us">
http://g.imageshack.us/img227/pd2vp8.jpg/1/ -
Section removed to see what chemical can remove the super adhesive 
 
 
http://imageshack.us">
http://g.imageshack.us/img227/pd3fo8.jpg/1/ -
Hey Presto, it has worked without damaging any material 
 
One of the most Labour intensified chassis to work on, as the adhesive is ment for a a permanent bond! (instead of a nut&bolt use a weld) !!
 
This is what PD Use for Dust caps, a activator and a  cyanoacrylate adhesive
The next best thing would be to use a clear basic paper adhesive Evo-Stick 5007/2
 
The same  (activator and a  cyanoacrylate adhesive ) is used for Spider to voicel coil joining,


-------------
Sticks n Stones


Posted By: chickenfizz
Date Posted: 18 September 2008 at 4:40pm
Araldite is what I've used for spiders and the edge of surrounds, this might not be THE RIGHT way of doing it but it's always worked for me :) I use bog standard pva for dust caps. The only time I've used different glues is when the kit actually comes with them.


Posted By: CHAMPION
Date Posted: 19 September 2008 at 8:37am
Chicken, you try and remove it if the coil blows !!! Nightmare, Labour ££ goes up

-------------
Sticks n Stones



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net