bass reflex subs
Printed From: Speakerplans.com
Category: Plans
Forum Name: New Projects Forum
Forum Description: Forum for new speakerplans projects, in memory of Tony Wilkes, 1953 - 2014
URL: https://forum.speakerplans.com/forum_posts.asp?TID=19758
Printed Date: 27 March 2026 at 4:06am
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com
Topic: bass reflex subs
Posted By: noobsound
Subject: bass reflex subs
Date Posted: 18 September 2008 at 8:16am
     Volume of 160L, I am going to load them with RCF lf18N401
|
Replies:
Posted By: bitzo
Date Posted: 18 September 2008 at 8:24am
| b&c plans? |
Posted By: noobsound
Date Posted: 18 September 2008 at 8:47am
| no! they are my own plans designed to fit my van |
Posted By: bitzo
Date Posted: 18 September 2008 at 8:50am
| I see, porting is similar to the b&c one. Nice build |
Posted By: noobsound
Date Posted: 18 September 2008 at 11:04am
| neah i don't know the b&c projects but i do know that RCF has ports this way on some of theyr subs and on theyr plans on the oficial site. |
Posted By: mylesound
Date Posted: 18 September 2008 at 7:18pm
| I think its 18sound that has ports like thoes, not B&C. |
Posted By: noobsound
Date Posted: 14 December 2008 at 8:00am
   
           some of the last pictures were taken after using the subs several times so that's why they are dusty
|
Posted By: UpComingSound
Date Posted: 14 December 2008 at 10:03pm
do any one rate the peavey low max double 18 relfex subs? 
|
Posted By: SteveAATW
Date Posted: 15 December 2008 at 1:00am
| Nice cabs - from looking at them they're not far off what the D&B Q Sub looks like behind its grill, stick a B&C driver in and your away.... |
Posted By: noobsound
Date Posted: 15 December 2008 at 8:41am
|
Yess from what i know several brands use similar design for theyr reflex boxez.
i designed my own to fit my van ( u can see it in one of the pics). indorrs they are pretty impressive powerd by a fidek fpa G12 amp (monster).I use the subs only on small partyes like this.
 |
Posted By: tombell
Date Posted: 17 September 2014 at 10:37am
|
Hello. I was wondering if I could ask you for a favour. I just saw your speakers and must say I liked their structure. Would it be ok if I asked you to give me the measures so I can make the speakers as well. Many thanks! Eliton
 |
Posted By: all bass
Date Posted: 17 September 2014 at 12:04pm
This thread is almost 6 years old and the OP hasn't been online in over 1.5 years... But since these cabs are very basic reflex designs you could also try and model something yourself using http://www.linearteam.dk/default.aspx?pageid=winisd" rel="nofollow - WinISD around your driver of choice. |
tombell wrote:Posted By: MarjanM
Date Posted: 17 September 2014 at 12:16pm
|
That box is RCF 8001 copy. ------------- Marjan Milosevic MM-Acoustics www.mm-acoustics.com https://www.facebook.com/pages/MM-Acoustics/608901282527713 |