Nice one PD... :)
Printed From: Speakerplans.com
Category: General
Forum Name: Electro Frying Forum
Forum Description: Talk about drivers, processors and mixers
URL: https://forum.speakerplans.com/forum_posts.asp?TID=21722
Printed Date: 27 March 2026 at 2:16am
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com
Topic: Nice one PD... :)
Posted By: (SoundcreationaudiO)
Subject: Nice one PD... :)
Date Posted: 29 November 2008 at 7:27pm
|
i had a few pd184 drivers fall apart on me when used in pretty normal standard conditions, the cone just separated away from the former simply down to lack of adhesive as far as i can see.. some uncaring employee i imagine..
but!, had a word with the the pd bunch, and 3 new drivers turned up on friday, improved glueing by the looks of it, a much larger bead of adhesive present at the base of the cone.
so, nice one! first class service from PD fair play.. and nice to deal with as always..  ------------- |
Replies:
Posted By: the smf
Date Posted: 29 November 2008 at 7:48pm
|
any idea what the manufactur date on those faulty ones were?
just bought 3 from blue aran n hope they dont have the same problem ------------- Existenze Records - http://www.chemical-records.co.uk/sc/downloadstore/release/6625 |
Posted By: jbl_man
Date Posted: 29 November 2008 at 7:53pm
|
This appears to be a common fault....look at this thread.
http://www.speakerplans.com/forum/forum_posts.asp?TID=21137 - http://www.speakerplans.com/forum/forum_posts.asp?TID=21137 ------------- Be seeing you. |
Posted By: (SoundcreationaudiO)
Date Posted: 29 November 2008 at 7:54pm
|
theyd be the new replacements smf, so no wories.. ------------- |
Posted By: the smf
Date Posted: 29 November 2008 at 7:56pm
|
hope so, 2 are from august and the other was september of this year ------------- Existenze Records - http://www.chemical-records.co.uk/sc/downloadstore/release/6625 |
Posted By: (SoundcreationaudiO)
Date Posted: 29 November 2008 at 8:05pm
|
u could make sure, and use some 2 pack epoxy.. run a bead around the base of cone/coil former to bond the 2 together even more?
I think the date on the stickers are from a batch from may this year. ------------- |
Posted By: the smf
Date Posted: 29 November 2008 at 8:19pm
|
dont say that, the odd pd 184 i purchased from davey t at the same time as buying the usb prototype is from may 2008
altho i can see a nice glue residue around the yellow suspension part, would it be safe to assume that this might be one of the better ones??? ------------- Existenze Records - http://www.chemical-records.co.uk/sc/downloadstore/release/6625 |
Posted By: (SoundcreationaudiO)
Date Posted: 29 November 2008 at 8:31pm
|
mmmm, go buy some araldite... just in case.. wont take you 5 min to run a bead around .... above the suspension and over the base of the cone.. ------------- |