Letterbox X1 plan
Printed From: Speakerplans.com
Category: Plans
Forum Name: X1
Forum Description: Discussion / Questions about the X1 sub
URL: https://forum.speakerplans.com/forum_posts.asp?TID=22523
Printed Date: 03 June 2023 at 1:13pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Letterbox X1 plan
Posted By: AM55
Subject: Letterbox X1 plan
Date Posted: 04 January 2009 at 9:23pm
|
Have tried a search but cant find it anywhere. Can someone point me in the right direction. Cheers  |
Replies:
Posted By: norty303
Date Posted: 04 January 2009 at 9:25pm
|
Funnily enough, in a thread with the same title as yours!
http://www.speakerplans.com/forum/forum_posts.asp?TID=2452&KW=letterbox&PID=19901#19901 - http://www.speakerplans.com/forum/forum_posts.asp?TID=2452&KW=letterbox&PID=19901#19901 ------------- My laser stuff: http://www.facebook.com/SubsonicSystems" rel="nofollow - Frikkin Lasers |
Posted By: AM55
Date Posted: 05 January 2009 at 9:46pm
| Thank you, i must be blind. |
Posted By: abrupt
Date Posted: 05 January 2009 at 11:16pm
| what is the better of the 2 |
Posted By: gwarntek
Date Posted: 05 January 2009 at 11:51pm
|
If you mean the letterbox compared with the original, im 99.99% certain theyre the same, due to same ports, same volume etc, just a different shape to match a stack of HD15s
Peace
|
Posted By: norty303
Date Posted: 06 January 2009 at 12:45am
|
Letterbox measured slightly lower response. Rog said it was prob due to the larger port area in contact with the ground plane. ------------- My laser stuff: http://www.facebook.com/SubsonicSystems" rel="nofollow - Frikkin Lasers |
Posted By: jamwa
Date Posted: 07 April 2009 at 11:11am
|
is there any difference in performance with this version over the RM design... ------------- Sound, Light, Projection, Display, Cameras and production support |
Posted By: norty303
Date Posted: 07 April 2009 at 6:42pm
|
Um, did you read the posts before yours? ------------- My laser stuff: http://www.facebook.com/SubsonicSystems" rel="nofollow - Frikkin Lasers |
Posted By: jamwa
Date Posted: 12 April 2009 at 6:18am
|
hhhmmmmmmmm ------------- Sound, Light, Projection, Display, Cameras and production support |
Posted By: hond
Date Posted: 11 October 2009 at 12:42pm
| does the Void V18-1000 fit? |
Posted By: Dougies Music
Date Posted: 23 October 2009 at 12:58pm
|
Seriously? Have you read the thread in the link above? "4mm clearance either side of a void v18-1000" Nicely answers your question right there... ------------- http://www.dougiesmusic.com - http://www.dougiesmusic.com |
Posted By: jonminns
Date Posted: 23 October 2009 at 3:08pm
|
Unless your build is 8mm out, in which case it won't fit
------------- 4 ohms is for wimps |
Posted By: norty303
Date Posted: 23 October 2009 at 5:29pm
that almost sounded like the dreadful voice of experience ------------- My laser stuff: http://www.facebook.com/SubsonicSystems" rel="nofollow - Frikkin Lasers |
Unless your build is 8mm out, in which case it won't fitPosted By: Dougies Music
Date Posted: 23 October 2009 at 6:11pm
------------- http://www.dougiesmusic.com - http://www.dougiesmusic.com |
Posted By: cyte
Date Posted: 04 November 2009 at 5:45pm
are they any other effects of changing chamber dimensions (but maintaining the same volumes)? (in general, not just the X1) |
Posted By: Abo
Date Posted: 10 December 2009 at 1:17am
|
so letterbox x1 and then mod it with 2 8mm panels on the sides would be fine then ? |
Posted By: cravings
Date Posted: 10 December 2009 at 1:45am
| 8mm panels what? fine for what? |
Posted By: backlash
Date Posted: 14 February 2010 at 3:30pm
|
To make it fit the V18-1000 when your is build 8mm out! ------------- According to suicide statistics, Monday is the favored day for self-destruction. http://www.truesoundhire.co.uk/" rel="nofollow - Sound Hire |
Posted By: DjTAB
Date Posted: 28 February 2012 at 6:23pm
|
I now have four of these babies to load with Void V-18's. Can't. Effing. Wait.  |
Posted By: bee
Date Posted: 28 February 2012 at 8:24pm
errr no.... its the internal measurement that matters..... you can add 25mm panels on the side if you want, but it will still be 8mm internally to small...... the rule hear is measure twice cut once.
|
Posted By: mini-mad
Date Posted: 16 July 2012 at 9:03am
lol.... i think that shot rite over his head...... lol
|
Posted By: SerenitySoundSystem
Date Posted: 27 March 2017 at 8:36pm
|
has anyone got an updated plan of the letter box X1? i have two and want another 2 built ASAP! thanks guys and gals!
 |