X10, X12, X15 and XM15 - How many X15 for two X1 by side?

Print Page | Close Window

How many X15 for two X1 by side?

Printed From: Speakerplans.com
Category: Plans
Forum Name: X10, X12, X15 and XM15
Forum Description: Discussion / Questions about the X10, X12, X15 and XM15
URL: https://forum.speakerplans.com/forum_posts.asp?TID=2290
Printed Date: 23 April 2024 at 4:06pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: How many X15 for two X1 by side?

Posted By: nuendo
Subject: How many X15 for two X1 by side?
Date Posted: 27 July 2005 at 4:42pm

For two X1 by side, how many X15? Thank.

Replies:

Posted By: norty303
Date Posted: 27 July 2005 at 5:20pm

If you've got 2 X1's per side then 4 X15's should be enough. You might even get away with 2 depending on how high you cross

-------------
My laser stuff: http://www.facebook.com/SubsonicSystems" rel="nofollow - Frikkin Lasers

Posted By: nuendo
Date Posted: 28 July 2005 at 12:52am

I think I will cross near 70Hz

Posted By: Tom Umney
Date Posted: 30 July 2005 at 8:51pm

I think 100hz cross over point would be better.

Posted By: norty303
Date Posted: 31 July 2005 at 12:24pm

I think i'll go for 80hz....

Who's next?

And is there a prize for the closest?

-------------
My laser stuff: http://www.facebook.com/SubsonicSystems" rel="nofollow - Frikkin Lasers

Posted By: Timebomb
Date Posted: 31 July 2005 at 8:45pm

Id go for it depends for the music being played and where the weight of the kick drum is.

Posted By: Jogge
Date Posted: 02 August 2005 at 5:28am

I use the X1's with X12's on top for dance, rap, hiphop music with one X12 per X1.

The crossover frequencies are set to 90Hz and 1.8kHz which gives us a nice warm sound. The X1 X12 combination is not very suitable for techno though ...

update:
Forgot to mention i've set the HPF on the LMS to 35 Hz for the X1.

-------------
Always listen to experts. They'll tell you what can't be done and why. Then do it.