need Martin W8C plans
Printed From: Speakerplans.com
Category: Plans
Forum Name: Other plans
Forum Description: Discussion / Questions about all the other plans
URL: https://forum.speakerplans.com/forum_posts.asp?TID=2338
Printed Date: 26 March 2026 at 10:03pm
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com
Topic: need Martin W8C plans
Posted By: cibercut
Subject: need Martin W8C plans
Date Posted: 04 August 2005 at 7:26pm
| i need the plans of MARTIN W8C sattelite |
Replies:
Posted By: chilli
Date Posted: 07 August 2005 at 11:32am
|
the w8c is a pretty standard trap box, but has a 6.5" and a 1" mounted
on a strange foam like material horn section with a phase plug, these
are available from martin for around Ј130 iirc(without drivers) they
also have a switchable crossover built in to allow you to run the cabs
2 or 3 way. the drivers used are by PHL and seeing as they only supply them to manufacturers and not to the end user, you may have a few problems in replicating the performance of the original cabs. |
Posted By: Tom Umney
Date Posted: 08 August 2005 at 12:49pm
|
Go for porn horns if you looking for phase plug horn for midrange.
|
Posted By: TDA-Audio
Date Posted: 11 August 2005 at 5:02pm
| ну я же тебе тоже самое сказал - ну вообщем там пластиковые рупора(с) - а сверху фанера... |
Posted By: cibercut
Date Posted: 11 August 2005 at 5:24pm
| да мне хотяб "фанерные чертежи" а с рупорами я разберусь. под пишаль уже есть. осталось только на середину слепок снять и съездить на завод спросить или купить где-то подобный |
Posted By: mans1000
Date Posted: 12 August 2005 at 5:05am
|
Did'nt quite get that......? |
cibercut wrote:
Posted By: rastaman
Date Posted: 12 August 2005 at 7:19am
|
Posted By: rastaman
Date Posted: 12 August 2005 at 7:20am
|