gsub cutsheet
Printed From: Speakerplans.com
Category: Plans
Forum Name: Ported Enclosures
Forum Description: Post all your reflex and bandpass and 'other' boxes with holes in stuff here...
URL: https://forum.speakerplans.com/forum_posts.asp?TID=24697
Printed Date: 27 March 2026 at 12:38am
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com
Topic: gsub cutsheet
Posted By: RUS
Subject: gsub cutsheet
Date Posted: 06 March 2009 at 9:46pm
i hope this works cut sheet for gsub.
|
Replies:
Posted By: Stray-Sounds
Date Posted: 06 March 2009 at 10:38pm
|
did you make it?
------------- <a href="http://www.soundhirewales.co.uk/">PA & Lighting - Sound Hire Wales</a> |
Posted By: RUS
Date Posted: 06 March 2009 at 10:45pm
|
hi. what the gsub or the plans i just posted.
|
Stray-Sounds wrote:Posted By: Stray-Sounds
Date Posted: 07 March 2009 at 1:27am
|
the cutsheet
------------- <a href="http://www.soundhirewales.co.uk/">PA & Lighting - Sound Hire Wales</a> |
Posted By: RUS
Date Posted: 07 March 2009 at 2:04am
hi stray sounds i did. you should find that it right down to the mm.
 |
Posted By: Stray-Sounds
Date Posted: 08 March 2009 at 3:46pm
|
I think your cutsheet is wrong rus. the bigger sheet shows 1136 which is bigger than the whole cab. that sheet should be 1064 geth ------------- <a href="http://www.soundhirewales.co.uk/">PA & Lighting - Sound Hire Wales</a> |
Posted By: RUS
Date Posted: 08 March 2009 at 4:03pm
|
hi gethin thank you for pointing that out to me. sorry your right my cut sheet is wrong but it should'nt be 1064 like you say it should be 1100.
i feel like such a dick i got it wrong because of the way i was looking at the plan.
|
Posted By: Stray-Sounds
Date Posted: 08 March 2009 at 5:19pm
|
I cant believe how confusing im finding this box. its so simple, any horn box must be hard work! ------------- <a href="http://www.soundhirewales.co.uk/">PA & Lighting - Sound Hire Wales</a> |
Posted By: RUS
Date Posted: 08 March 2009 at 6:13pm
|
there not really hard work i just looked at the plan a little wrong. i've checked the plans over again and the only mistake i made was the top and bottom instead of being 670x1136. it should be 670x1100. all the rest of it is right. i've double checked it. and it is a really simple design (i hope i wont be eating my words again) no i wont. thanks again gethin for pointing that out for me. |
Posted By: RUS
Date Posted: 08 March 2009 at 6:15pm
| ps. ill draw up a new cut sheet with the correct measurement. |
Posted By: Stray-Sounds
Date Posted: 08 March 2009 at 6:26pm
|
Another thing i'm not too sure about is the baffle. The length of the cab is 1100. so 1100 - 36 (2 x 18mm each end of the box) = 1064 then 1064 - 36 again (the ports) = 1028 then 1028 - 120 (port size) = 908 so 908 divide by 2 = 454 So should the baffle be 454x500mm ?? Geth ------------- <a href="http://www.soundhirewales.co.uk/">PA & Lighting - Sound Hire Wales</a> |
Posted By: RUS
Date Posted: 08 March 2009 at 6:48pm
|
hi.
gethin you do realise that the total lenght of the box is 1136mm.
|
Posted By: Stray-Sounds
Date Posted: 08 March 2009 at 6:50pm
|
aaaaaaahhhhhhhh f**k! haha, sorry! nice 1 for pointing that out! god i'm sh*t at this, haha. Geth ------------- <a href="http://www.soundhirewales.co.uk/">PA & Lighting - Sound Hire Wales</a> |
Posted By: RUS
Date Posted: 08 March 2009 at 6:54pm
|
it's cool i still feel like a c**t for messing up the cut sheet it's so simple i should be ashamed of myself.
rus.
|
Posted By: Stray-Sounds
Date Posted: 08 March 2009 at 6:58pm
|
So all that's wrong with it now is 'top & bottom' should be 1100 ?
------------- <a href="http://www.soundhirewales.co.uk/">PA & Lighting - Sound Hire Wales</a> |
Posted By: RUS
Date Posted: 08 March 2009 at 7:27pm
|
hi. sorry gethin i was on the phone thats right all thats wrong with the cut sheet i drew up is that the top and bottom are 1100mm long.
are you still going to build some
|
Posted By: RUS
Date Posted: 08 March 2009 at 7:30pm
|
sorry i didnt word that very well on the cutsheet i said the top and bottom should be 1136mm long but that was wrong.
the top and bottom should be 1100mm long.
|
Posted By: Stray-Sounds
Date Posted: 08 March 2009 at 7:37pm
|
Yes I'm going to build a pair very soon. Trying to decide whether I should go for MDF or ply. I want ply but i don't want to pay 50 quid a sheet!! I was talking to my mate earlier and we are thinking about using ply for the outer box and use MDF for all the bracing ports and baffles. ------------- <a href="http://www.soundhirewales.co.uk/">PA & Lighting - Sound Hire Wales</a> |
Posted By: RUS
Date Posted: 09 March 2009 at 1:55am
|
hi. gethin
go for ply all the way its not worth having the mdf swell up on you for the few quid more the ply would be worth it.
|
Posted By: Stray-Sounds
Date Posted: 09 March 2009 at 2:45am
|
I spose it would be worth the extra couple quid.. but hows the bracing gonna get wet?
------------- <a href="http://www.soundhirewales.co.uk/">PA & Lighting - Sound Hire Wales</a> |
Posted By: RUS
Date Posted: 09 March 2009 at 12:45pm
|
hi.
i did'nt really mean getting wet as nodout you know what happens to mdf if it's in damp condistions im not saying your cabs would be but if they ever were the mdf baffle and bracing could swell up nasty.
 |
Posted By: Stray-Sounds
Date Posted: 09 March 2009 at 1:36pm
|
Any idea of how many sheets of sheets of ply would be needed for 2 cabs? ------------- <a href="http://www.soundhirewales.co.uk/">PA & Lighting - Sound Hire Wales</a> |
Posted By: RUS
Date Posted: 10 March 2009 at 12:49am
|
hi geth.
i hav'nt worked it out yet but a ruff guess three sheets of 8x4 should make two gsubs.
 |
Posted By: Stray-Sounds
Date Posted: 10 March 2009 at 1:14am
|
Yer i started a cutsheet today to work out the best way to fit it on as little amoujn of wood as possible. I think 3 will just do it.
------------- <a href="http://www.soundhirewales.co.uk/">PA & Lighting - Sound Hire Wales</a> |
Posted By: aperrado
Date Posted: 10 March 2009 at 2:19am
|
hi guys the g-sub sound no easy for me I going to start with B&C18 subs but please place pics when start building g-sub I will try to do it after the B&C18 ty ang very good look on building I got the cutsheet updated ty see u later. ------------- Im hard to learn but still asking |
Posted By: jonminns
Date Posted: 10 March 2009 at 5:44pm
| I'm gonna be very surprised if 3 sheets does 2 subs... 3 sheets only just does 2 x1 |
Posted By: aperrado
Date Posted: 15 March 2009 at 8:43pm
|
hey rus or strand do u know why the measures on port is 454mm inside and outside it is
536. what do I need to do on that part? ------------- Im hard to learn but still asking |
Posted By: RUS
Date Posted: 15 March 2009 at 10:39pm
hi.
well for starters it's not 454mm inside like you said it's 464 the port is a rectangle tube it takes for small sheets of 18mm board to make the port take a second look at the plan on my cutsheet i made one mistake top&bottom should be 1100mm long instead of 1136 as i'd said.
if what i have said does'nt help let me know.
rus.
 |
Posted By: aperrado
Date Posted: 16 March 2009 at 11:04pm
|
Ty very much look like I got it ------------- Im hard to learn but still asking |
Posted By: socw
Date Posted: 27 March 2009 at 8:11am
| any chance of reposting that cutsheet, the image has been deleted off photobucket. |
Posted By: RUS
Date Posted: 27 March 2009 at 11:49am
hi.
no probs but the first cut sheet i made had one error on it the top&bootom panels were marked 1136mm long when they should be 1100mm long.
iv'e made the correction to the cutsheet and i wlll post it soon.
rus.
 |
Posted By: tweeter box
Date Posted: 27 March 2009 at 12:42pm
cut sheet for G-Subs would be fantastic  ------------- PRECISION SOUND SYSTEM. Feeding the peoples needs for Roots Music. Strictly premium grade reggae and dub steppers from the early 70's to present day. |