G-SUB CUTSHEET
Printed From: Speakerplans.com
Category: Plans
Forum Name: Ported Enclosures
Forum Description: Post all your reflex and bandpass and 'other' boxes with holes in stuff here...
URL: https://forum.speakerplans.com/forum_posts.asp?TID=25371
Printed Date: 24 September 2023 at 1:50pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: G-SUB CUTSHEET
Posted By: RUS
Subject: G-SUB CUTSHEET
Date Posted: 27 March 2009 at 1:09pm
|
Replies:
Posted By: Sibulus
Date Posted: 27 March 2009 at 1:16pm
| you must be ecstatic now RUS! |
Posted By: RUS
Date Posted: 27 March 2009 at 1:21pm
|
|
Posted By: philipbeyma
Date Posted: 27 March 2009 at 2:24pm
|
Posted By: RUS
Date Posted: 28 March 2009 at 11:59am
|
|
Posted By: RUS
Date Posted: 28 March 2009 at 12:01pm
 |
Posted By: socw
Date Posted: 28 March 2009 at 1:32pm
|
great job, can just get it to fit on 3 sheets of 8 x 4 for 2 subs. sheet 1 - 2 x tops, 2 x backs, 4 x brace D sheet 2 - 2 x bottom, 4 x baffles, 2 x brace A sheet 3 - 4 x sides, all other remaining braces and ports. |
Posted By: RUS
Date Posted: 28 March 2009 at 2:03pm
|
no probs if anyone has any confussion where the the brace panels fit just ask me. |
Posted By: Stray-Sounds
Date Posted: 28 March 2009 at 7:09pm
Yay 
Do you know how the brace from the back of the cab attaches to the main bracing thingy? ------------- <a href="http://www.soundhirewales.co.uk/">PA & Lighting - Sound Hire Wales</a> |
socw wrote:Posted By: cravings
Date Posted: 28 March 2009 at 8:41pm
|
http://www.speakerplans.com/index.php?id=ludog - http://www.speakerplans.com/index.php?id=ludog
http://www.speakerplans.com/index.php?id=jacobg - http://www.speakerplans.com/index.php?id=jacobg |
Posted By: RUS
Date Posted: 29 March 2009 at 2:33am
hi.
first of all i would take brace A and both of brace B and make shore they are a snug fit when you put them in place in the cab then i myself would glue and screw one of the B braces in the correct place.
then i would glue and screw brace A (i would just glue and screw brace A through the back panel) then glue and screw the second brace B. i would only use glue to join where brace A and B meet in the centre of the cab.
done.
i hope ive made sence and it helps
|
Posted By: Ryan94
Date Posted: 04 June 2009 at 5:02pm
Please help i am really stugerling on how the bracing goes together! and cant seem to work out wich bit goes where. are there any pics or diagrams of where brace a, b, c and d goes. or any help would be greatly appresiated.
thanks
|
Posted By: rajandedi
Date Posted: 09 June 2009 at 11:08pm
| I'm confused about the braces! i know what brace A is, please could u tell me about B, C, D !!! |
Posted By: aperrado
Date Posted: 18 October 2009 at 4:20am
|
I think dado joints and glue can help ------------- Im hard to learn but still asking |
Posted By: iand4403
Date Posted: 24 July 2010 at 11:37am
| How important are the braces? Without them I could slot my midtops inside for easy transport.. |
Posted By: djeddie
Date Posted: 24 July 2010 at 1:56pm
Very important in my opinion. In simple terms they stop the cabinet from flexing or to put it another way, make the cab more solid. ------------- Chas n Dave : it's like Drum and Bass but with beards. E=mc² ±3dB |
Posted By: windowgobo
Date Posted: 07 October 2010 at 10:45pm
|
will it sound different or prolong the life or will they brake if stacked?
thanks ------------- In lab and mouse studies, the compound, known as THC, cut lung tumor growth in half and helped prevent the cancer from spreading, says Anju Preet, PhD, a Harvard University researcher in Boston |
Posted By: iceman1575
Date Posted: 10 November 2010 at 7:24am
|
Sorry for the bump, but I appreciate doing this! I'm going to be building me a couple of these for my DJ business and I didn't want to fiddle around with cutout sheets. What are the two cutouts labeled "Part" for though?
------------- Ice Cold Entertainment Pro Sound Services - Ashland, KY Presonus Studiolive 24.4.2 : Electro-Voice LiveX Powered Rig FOH: 2x115P, 2x118P - Monitor: 4x112P |
Posted By: eltron
Date Posted: 10 November 2010 at 7:52am
I think it's supposed to say "Port", but the pic's a bit blurry. The bigger ones form the port and the smaller (120 x 193 mm) are port braces. |
Posted By: iceman1575
Date Posted: 10 November 2010 at 11:47pm
|
Ah, my bad! It was near 4AM here and I was tired lol. Thanks!
------------- Ice Cold Entertainment Pro Sound Services - Ashland, KY Presonus Studiolive 24.4.2 : Electro-Voice LiveX Powered Rig FOH: 2x115P, 2x118P - Monitor: 4x112P |
Posted By: RUS
Date Posted: 12 November 2010 at 11:39pm
|
they both say port but the text i used did come out blurry sorry. the two that say port are both parts that make the port. picture the G-SUB port as a oblong tunnel. 2x 193x500 and 2x 120x193 will make one gsub port.! |
Posted By: satta sound
Date Posted: 29 November 2010 at 4:11pm
|
is this 8 m. x 4 m? where can i get sheets that big? (holland) |
Posted By: cravings
Date Posted: 29 November 2010 at 4:37pm
| eh no. it'd be 8ft x 4ft.. so 2240mm x 1220mm... |
Posted By: The Builder
Date Posted: 01 December 2010 at 11:40pm
|
Nothing here ------------- It just is. |
Posted By: Adam_Iron_Horse
Date Posted: 20 February 2011 at 10:58am
|
Hey we started building to this cut sheet yesterday and have had a few problems with sizes... I have measured all the sheets and they match this cutsheet so we havent cut it wrongly... The baffle is too short we found that it needs to be 490mm wide by 500mm high. Brace B are all too long they should be 500 unless you want them poking out the top of the box... 4xBrace C is too short to reach all the way across the box we had to cut another piece to fit in. Mabye there we have not read this informationg right im not sure plesae feel free to rip this comment apart just don't want others to do the same as us and waste wood... |
Posted By: Adam_Iron_Horse
Date Posted: 21 February 2011 at 1:47pm
My bad just realised that the baffle is right size we didnt put the sides of the ports in when we put it together to see how it goes... thank  that wasnt us putting it togetrher...but Brace B and C are still funny... anyone else have that trouble? |
Posted By: Adam_Iron_Horse
Date Posted: 04 March 2011 at 10:46pm
| sorry realised my mistakes forget my comments :) |
Posted By: nuclearbass
Date Posted: 31 August 2011 at 4:13pm
|
wicked thread this, any one like to make it idiot prrof and put a drawing up of how to cut all these outta 2 sheets cos the man @ b&q looked puddled after hed had the cut list most of the day, n i dont wanna get it wrong lol ------------- one life - have fun! Force fusion pro audio |
Posted By: Adam_Iron_Horse
Date Posted: 31 August 2011 at 5:08pm
|
I used a program called max cut pro for mine you just put in the dimensions of the sheets and quantityies and it puts it onto the sheet in optimum position But for ease of the thread here is my cut sheet for one g-sub 
|
Posted By: nuclearbass
Date Posted: 31 August 2011 at 5:13pm
|
Wicked cheers...did u get it to all fit togethor in the end? ------------- one life - have fun! Force fusion pro audio |
Posted By: Adam_Iron_Horse
Date Posted: 31 August 2011 at 5:16pm
|
ye i did... It was stupid mistakes we made reading the plans and the cutlist.... The cutsheet should be fine but id check it over anyway... :P |
Posted By: Adam_Iron_Horse
Date Posted: 31 August 2011 at 5:17pm
| just realised the numbers and the letters on the cutsheet dont match because i put the numbers in myself... |
Posted By: nuclearbass
Date Posted: 31 August 2011 at 6:52pm
|
Lol....i dnt have net acces at minute....ill have to wait to.sort it unless u fancy doing it :) ------------- one life - have fun! Force fusion pro audio |
Posted By: mrkaya
Date Posted: 23 November 2011 at 1:13am
|
Greetings , Do anyone can tell me why brace B is 541 ??? I dont really understand the quoatation for the brace (exept 60x500 for brace d) Thank you very much ! Peace |
Posted By: speakergeek
Date Posted: 13 March 2012 at 6:50pm
|
This is a great design and will be my very first build. I don't know why but I cannot read anything on the cut list. I don't have a computer right now and I'm using my Android to view this. I guess it's that but I gotta figure it out. Thanks so much to the person that made this cut sheet. It's VERY helpful. -Geek- |
Posted By: Dub Specialist Sound
Date Posted: 15 April 2015 at 9:19pm
|
why is my cut list diffrent to this one and orther on here? this isnt right some how is this cut-sheet for butt joint? ------------- Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE... |
Posted By: Dub Specialist Sound
Date Posted: 15 April 2015 at 9:22pm
|
or rebated? ------------- Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE... |
Posted By: RUS
Date Posted: 16 April 2015 at 4:52pm
hay dub it is a plan for standard butt joint build it is to the exact plan of rogs is there anything in particular I can help you with ? |
Posted By: Dub Specialist Sound
Date Posted: 16 April 2015 at 5:08pm
|
Yes Rus if poss just want to check it to my cut list i did my self , butt joined its probley me bro, not borthered about the internal bracing as we know some do it a little diffrent so just to keep it simple mine 670mm x 536mm x 2 (Top and Bottom) 618mm x 1100mm x 2 (Side Panels) 1100mm x 500mm x 1 (Back Panel) 490mm x 500mm x 2 (Front Baffle's) 500mm x 193mm x 2 (Shelf Ports) 193mm x 120mm x 3 (Port brace) Extra one for the middle, just my way ------------- Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE... |
Posted By: Dub Specialist Sound
Date Posted: 16 April 2015 at 5:09pm
|
Measurements as the box in standing up, as we know sme do as the box is lying down nice one ------------- Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE... |
Posted By: Dub Specialist Sound
Date Posted: 16 April 2015 at 9:36pm
|
why are your baffles 472mm are you building them from the side of baffle or flush on the inside ------------- Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE... |
Posted By: Dub Specialist Sound
Date Posted: 16 April 2015 at 9:39pm
|
just calulated it your putting the port shelfs on the side of the baffles ------------- Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE... |
Posted By: Dub Specialist Sound
Date Posted: 16 April 2015 at 9:40pm
|
so mine is correct littaly by the plan ------------- Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE... |
Posted By: Dub Specialist Sound
Date Posted: 16 April 2015 at 9:40pm
|
hang on no im not lol i tied man lol ------------- Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE... |
Posted By: RUS
Date Posted: 17 April 2015 at 9:07pm
Dub stop talking to your self  I've tried to work it out I think I understand some of what you did, you can give me the external dimensions of your box if you want and the meterial thickness and I can work out the litre box you have and compare it to the original I think your box dimensions are slightly smaller than the original plan, A lot of people seem to not add the side parts of the port making the port 36mm wider I don't know why they do this 
|
Posted By: Dub Specialist Sound
Date Posted: 17 April 2015 at 9:15pm
|
haha tell me about it Rus haha i think ive got it now , what it is when i zoomed into the plan, i realised some put them ports shelfs on the inside of the baffle and some put it on the outside thus making the baffle dimesions a little size different, not the over all box dimensions of 1136 correct? cheers rus ------------- Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE... |
Posted By: Dub Specialist Sound
Date Posted: 17 April 2015 at 9:17pm
|
yes got ya on the side port , making the port hole slighty larger , than on the plan ------------- Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE... |
Posted By: RUS
Date Posted: 17 April 2015 at 9:32pm
|
Yes the plan says to put the baffle butting up against the side of the port, It's difficult for me to work it all out as I'm on a mobile phone with a small screen |
Posted By: Dub Specialist Sound
Date Posted: 28 February 2016 at 8:32pm
|
Hey russ, is this cut sheet spot on bro? thanks... ------------- Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE... |
Posted By: blake8188
Date Posted: 22 October 2021 at 1:05am
|
Here is a cut sheet for those of us who only have access to 2400mm x 1200mm sheets of plywood, using all of RUS measurements :)   |