Print Page | Close Window

Bose 302 Cabinets plans, any body ?? please

Printed From: Speakerplans.com
Category: Plans
Forum Name: Plan Requests
Forum Description: All plan requests here
URL: https://forum.speakerplans.com/forum_posts.asp?TID=29922
Printed Date: 26 March 2026 at 8:16pm
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com


Topic: Bose 302 Cabinets plans, any body ?? please
Posted By: Tinyzero
Subject: Bose 302 Cabinets plans, any body ?? please
Date Posted: 21 August 2009 at 8:12pm

First of all, I must say I have always liked these cabinets from Bose

There not going below 40 Hz acutely band pass limits to 55 Hz with active eq module

But there have a fine strong bass not like horn or bass reflex systems at all

 

I have been trying to get at set of plans for a very long time now, with out any luck

Not even a picture from inside of the cabinets, are possible from google

 

The cabinets using 2 x 12” special speaker 4” voice coil, foam surround, with drilled pole plate, but please correct me if I am wrong.

 

As I see it, its a 6 order band pass cabinets with joined bass reflex ports

 

So any body help !

 

A set of plans for Bose 302 sub cabinets




Replies:
Posted By: djyves
Date Posted: 22 August 2009 at 6:19am
i am searching for the plan too


Posted By: _djk_
Date Posted: 22 August 2009 at 6:52pm
As usual, it would help to know what brand of drive units you can purchase.
 
BP6A enclosures are quite sensitive to driver parameters.


-------------
djk


Posted By: Tinyzero
Date Posted: 25 August 2009 at 12:17pm
Hi DJK
 
It is possible to buy a speaker with same T/S as the origianl speakers
so the plans / drawing af the cabinet is all i need Smile
 
Tinyzero 


Posted By: fontaine
Date Posted: 06 January 2010 at 6:19am

hey,  i'm in canada and have a pair of 302 sleeping in my basement......  ouch!!!Ouch  may be i could help out but your gonna have to be patient  Cry   till i open back the cabinets to take picture'S  and mesurments for you.  pretty simple to built ...!  i did a complete job on the suspensions in 2006 and repainted the cabinets adding also new plastic corners..... looks great now and works  like new!  Smile

cheers !  Francois.  Beer


Posted By: djyves
Date Posted: 12 May 2010 at 4:51pm
I am still interested, and looking for the plan.

-------------
"If brute force doesn't work, you're just not using enough!"


Posted By: fontaine
Date Posted: 12 May 2010 at 5:18pm
i'll be in touch with you soon .....
 
François.


Posted By: The Builder
Date Posted: 17 May 2010 at 11:48pm
Put Ciare drivers in them.


-------------
It just is.


Posted By: musicman
Date Posted: 18 May 2010 at 8:41am
even emmi delta 12lf works!


Posted By: fellamelad
Date Posted: 09 June 2010 at 7:00pm
Hi folks justgot a pair of 302's off e-bay they have been fitted with Eminence Delta 12LFA drivers which have rubber surrounds and look very similar to the original bose drivers , i have only ever seen the deltas with paper surrounds and cant seem to find any info on the rubber surrounded ones any ideas ?


Posted By: p1go
Date Posted: 09 June 2010 at 8:03pm
HI
Here's the plans:
http://yfrog.com/j5rtb3001wwwkepfeltolteshj - http://yfrog.com/j5rtb3001wwwkepfeltolteshj
http://yfrog.com/bcrtb3002wwwkepfeltolteshj - http://yfrog.com/bcrtb3002wwwkepfeltolteshj


Posted By: dougsand
Date Posted: 10 October 2010 at 1:16am
Hi, Did you ever get plans for Bose 302? Thanks, Doug


Posted By: djeddie
Date Posted: 10 October 2010 at 6:09pm
Originally posted by dougsand dougsand wrote:

Hi, Did you ever get plans for Bose 302? Thanks, Doug

Aren't the plans shown in the post above yours? (The yfrog links)


-------------
Chas n Dave : it's like Drum and Bass but with beards.             E=mc² ±3dB


Posted By: TONY.A.S.S.
Date Posted: 10 October 2010 at 8:03pm
Do you not need the Bose processor to make any Bose cab sound half reasonable?

-------------
http://www.facebook.com/tony.rossell.3" rel="nofollow - http://www.facebook.com/tony.rossell.3


Posted By: illuminate
Date Posted: 10 October 2010 at 11:15pm
Would normally be used with an 802C "controller" to produce low(ish) frequency farty noises. Only ever heard them used with the 802s so don't know what happens if you use then on their own with a "generic" mid-top. The 802s show their true colours when used without the 802C!Wacko I think the 802C adds a bit of an eq lift before you get down to the HPF so the 302s might sound a bit flat without it Ermm.

-------------
Sound is analogue, get over it!


Posted By: 4AC
Date Posted: 11 October 2010 at 1:14pm
You guys are gonna like this:  http://www.licht-geluid.nl/forum/zelfbouw-luidspreker-forum/16898-bouw-van-bose-sub-let-op-1-mb-aan-fotos.html - http://www.licht-geluid.nl/forum/zelfbouw-luidspreker-forum/16898-bouw-van-bose-sub-let-op-1-mb-aan-fotos.html
With thanks to the Dutch J&H forum.

Greetings,

Teun


Posted By: jjoakim
Date Posted: 21 August 2022 at 9:57pm
Hi

Does anyone have those plans still? 


Thanks


Posted By: Andika Bond
Date Posted: 12 June 2025 at 5:02am
Hi, 

send email to andre.aryanto at gmail dot com
maybe I have what you're looking for

regards,


Posted By: VECTORDJ
Date Posted: 14 June 2025 at 11:09pm


Posted By: VECTORDJ
Date Posted: 14 June 2025 at 11:15pm
Beyma 12LX60V2 works Good in the Bose 302 Sub Design....VECTORSONICS



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.08 - https://www.webwizforums.com
Copyright ©2001-2026 Web Wiz Ltd. - https://www.webwiz.net