Print Page | Close Window

Ecler DP300

Printed From: Speakerplans.com
Category: General
Forum Name: General Forum
Forum Description: Open Discussion / Questions
URL: https://forum.speakerplans.com/forum_posts.asp?TID=36388
Printed Date: 07 December 2023 at 7:55am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Ecler DP300
Posted By: supremesoundz
Subject: Ecler DP300
Date Posted: 26 February 2010 at 10:41pm
http://www.djdeals.co.uk/prod-downloads/DP300%20Data%20Sheet.pdf


Has anybody had any experience with the above LMS?

Thanks



Replies:
Posted By: Mircea Bartic
Date Posted: 27 February 2010 at 10:01pm
I had!

I used and installed DP300 in some of my installs and also in some live systems

What do you need to know?


-------------
general manager & head designer at nexus-acoustics research
http://www.facebook.com/nexus.acoustics.research" rel="nofollow - http://www.facebook.com/nexus.acoustics.research

Ex Nexus_3


Posted By: supremesoundz
Date Posted: 27 February 2010 at 10:28pm
sound? ease of use? reliablity?

Thanks in advance


Posted By: Quantum Sounds
Date Posted: 28 February 2010 at 1:33am
i used one a few times, i really dident like it, the signal lights on the frount had latency, and it is not very user friendly if you have to change settings without a pc (i never used the software so cant coment on that)
the sound quality was not as good as an xta and i couldn't tell the difrence form an ultradrive

all in all i went back to and ultradrive, 


Posted By: ArthurG
Date Posted: 28 February 2010 at 7:00am
this DP300 was a mistake from Ecler. I don't know what their managers though at that time (maybe they were thinking that they must follow Chinese wind to not loose market share), but it was a bad move to use this Digisynthetic crap and put Ecler logo on it. After receiving many negative feedback and facing many technical issues, they discontinued the product quite quickly before their brand was too much damaged. Now they use European stuff for their DSP and everything's fine again with this well respected brand.


Posted By: starstruck
Date Posted: 02 March 2010 at 5:50pm
Thank god I saw this thread !

One of my amp racks is full of Ecler gear ! 2 amps, eq, crossover and I was thinking about bidding on one on ebay . Don't think I will bother now.

Cheers
Kev


Posted By: Mircea Bartic
Date Posted: 02 March 2010 at 5:57pm
Go for the DP400

I use that one in my system







-------------
general manager & head designer at nexus-acoustics research
http://www.facebook.com/nexus.acoustics.research" rel="nofollow - http://www.facebook.com/nexus.acoustics.research

Ex Nexus_3


Posted By: starstruck
Date Posted: 02 March 2010 at 6:05pm
Nice systemClap

So whats the difference between the DP300 and DP400 ???

Thanks
KevStar


Posted By: Mircea Bartic
Date Posted: 02 March 2010 at 7:43pm
well, more processing power, different software, different unit hardware, 48dB/oct crossovers and EQ. comp /limit also in the input channels.

Ah, and the most important thing of all (for me anyway)

the DAMN USB conectionLOL

I still can't understand why some manufacturers still insist in using the RS232 in their devices despite no laptops being fitted with the connector since 2002-2003...


-------------
general manager & head designer at nexus-acoustics research
http://www.facebook.com/nexus.acoustics.research" rel="nofollow - http://www.facebook.com/nexus.acoustics.research

Ex Nexus_3


Posted By: starstruck
Date Posted: 02 March 2010 at 8:30pm
Sounds goodBig smile
 
Just need to find a 2nd hand one nowCry
 
KevStar



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net