Print Page | Close Window

wiring

Printed From: Speakerplans.com
Category: Plans
Forum Name: HD 15 horn
Forum Description: Discussion / Questions about the HD 15 horn
URL: https://forum.speakerplans.com/forum_posts.asp?TID=38116
Printed Date: 19 April 2024 at 10:29am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: wiring
Posted By: spallum
Subject: wiring
Date Posted: 13 April 2010 at 4:25pm

hi i was just wondering were to put me holes for the speakons if i put if behind the corner brace i will have to drill a hole through it is that ok? and do i need to fix my wire to something with brackets so it doesent move about or will this not matter.

cheersSmile



Replies:
Posted By: imageoven
Date Posted: 13 April 2010 at 10:31pm
I would fix down any flappable length of cable, movement breaks things over time.

If you have to pass the cable through a panel, a tightish hole and some sealant will keep thing airtight.

personally I would put the connector somewhere you won't see the cable if you look into the horn. I would also put it where it minimises the cable length inside the cab. negligable in the real world, but if everything else is equal, why add a resistive factor you dont need?


Posted By: spallum
Date Posted: 18 April 2010 at 12:09am
nice 1 mate ive already drilled my holes behind the corner brace now.... bummer shud b orite tho whaaat would u sugest to pin the wire i wud of thought pins and brackets but wouldnt they fall out over time due to the vibrations and i wouldnt wanna my driver upConfused


Posted By: imageoven
Date Posted: 18 April 2010 at 12:18am
Yes, I'd avoid pins. There's something I know as "P clips" which you can screw down, or look at cable tie bases, some of these can be screwed down.


Posted By: merlinmarshall
Date Posted: 05 May 2014 at 8:35pm
what wiring/cable are people using in the box?


Posted By: corell
Date Posted: 05 May 2014 at 8:40pm
any 2x 2,5 mm copper cable will be fine


Posted By: merlinmarshall
Date Posted: 06 May 2014 at 3:11pm
thanks.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net