Terminals on CIARE 12.00SWDCNDW?
Printed From: Speakerplans.com
Category: Plans
Forum Name: Punisher and X-tro
Forum Description: Discussion / Questions about the Punisher and X-tro
URL: https://forum.speakerplans.com/forum_posts.asp?TID=44241
Printed Date: 27 March 2026 at 8:37am
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com
Topic: Terminals on CIARE 12.00SWDCNDW?
Posted By: Crazy Dane
Subject: Terminals on CIARE 12.00SWDCNDW?
Date Posted: 17 October 2010 at 6:06pm
|
Which terminals are used in this speaker?
Can see at thomann.de that it is soldering terminals. Is this correct? In my world, that is not a good thing to use on a high power woofer! Push-terminals is preferred. ------------- Best regards... Frank |
Replies:
Posted By: djyves
Date Posted: 17 October 2010 at 6:21pm
If you don't want to solder them, you can use these: ------------- "If brute force doesn't work, you're just not using enough!" |
Posted By: Crazy Dane
Date Posted: 17 October 2010 at 6:28pm
|
Okay.. Then it is soldering terminals.. Thats sad :(
------------- Best regards... Frank |
Posted By: Tony Wilkes
Date Posted: 18 October 2010 at 10:02am
|
They are not soldering terminals they are for push-on crimp tags. It is not recommended to solder to a lot of these connectors as the insulating material often has a low melting point and you can destroy the connector or its surroundings. Tony ------------- www.forteaudio.eu - BMS - db-Mark Processors - Lexon (SAE) |
Posted By: Crazy Dane
Date Posted: 18 October 2010 at 2:46pm
|
Can they rattle loose? I really don't understand why they have choosen this type of connectors. They are pretty shitty  ------------- Best regards... Frank |
Posted By: abbotsmike
Date Posted: 18 October 2010 at 3:36pm
| Spade crimps probably hold a good deal of your cars electrics together. As long as they are the correct size and fit tightly they will be fine. |