From needle to horn
Printed From: Speakerplans.com
Category: General
Forum Name: Show Off Your Sound System
Forum Description: Show of your gear. Post pictures of your Sound System here...
URL: https://forum.speakerplans.com/forum_posts.asp?TID=45332
Printed Date: 27 March 2026 at 5:31am
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com
Topic: From needle to horn
Posted By: TONY.A.S.S.
Subject: From needle to horn
Date Posted: 14 November 2010 at 6:24pm
|
I thought this would interest all you horn freeks out there. It's just a picture in a mag that caught my eye. http://img560.imageshack.us/i/dscf0485.jpg/">  Uploaded with http://imageshack.us - ImageShack.us ------------- http://www.facebook.com/tony.rossell.3" rel="nofollow - http://www.facebook.com/tony.rossell.3 |
Replies:
Posted By: odc04r
Date Posted: 14 November 2010 at 11:17pm
|
My dad still has an old gramophone in the loft somewhere complete with HMV hard plastic (bakelite or similar?) records. Should dig that out really and have a gander... |
Posted By: VentureSound
Date Posted: 15 November 2010 at 1:09am
... would be interesting to hear what the big brass one sounds like with a hugh 2" comp slapped on the back! 
|
Posted By: TONY.A.S.S.
Date Posted: 15 November 2010 at 10:15am
|
The word horrendous comes to mind. The shape may be correct, but the material will be too thin. Aluminum is bad enough, thin brass would be worse. Would make an amusing picture though. ------------- http://www.facebook.com/tony.rossell.3" rel="nofollow - http://www.facebook.com/tony.rossell.3 |
Posted By: Teunos
Date Posted: 15 November 2010 at 10:38am
Go and pound a piece of aluminium with a hammer, that's what it will sound like. The material will resonate like crazy. ------------- Best regards, Teun. |
VentureSound wrote: