Punisher and X-tro - Modeling Xtro in Hornresp

Print Page | Close Window

Modeling Xtro in Hornresp - help required

Printed From: Speakerplans.com
Category: Plans
Forum Name: Punisher and X-tro
Forum Description: Discussion / Questions about the Punisher and X-tro
URL: https://forum.speakerplans.com/forum_posts.asp?TID=4818
Printed Date: 27 March 2026 at 8:37am
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com

Topic: Modeling Xtro in Hornresp - help required

Posted By: PolymorphicMark
Subject: Modeling Xtro in Hornresp - help required
Date Posted: 26 April 2006 at 4:24pm

I have just started to use horn response and wanted to model some different drivers for the xtro. I copied the parameters provided by Nexus_3 on a previous post link below.

http://www.speakerplans.com/forum/forum_posts.asp?TID=2638&PN=2&TPN=3 - http://www.speakerplans.com/forum/forum_posts.asp?TID=2638&a mp;PN=2&TPN=3

The problem is I notice that the value for MMD is 101g on the Eighteen Sound web site, but Nexus_3 has entered it as 49.94g. Are the parameters used by Nexus_3 not for the 15N930 or am I missing something. Specs for Eighteen Sound 15N930 can be found at

http://www.eighteensound.com/index.aspx?mainMenu=view_product&pid=232 - http://www.eighteensound.com/index.aspx?mainMenu=view_produc t&pid=232

The drivers I want to model are

BMS 15N830
http://www.bmspro.info/index.php?show=item&usbid=10282&id=54382 - http://www.bmspro.info/index.php?show=item&usbid=10282&a mp;id=54382

B & C 15N760
http://www.bcspeakers.com/index.php?sez=1&categoria=2&id_descrizione=44&prodotto=51&id_descrizione_prod=38 - http://www.bcspeakers.com/index.php?sez=1&categoria=2&am p;id_descrizione=44&prodotto=51&id_descrizione_prod= 38

B & C 15N100
http://www.bcspeakers.com/index.php?sez=1&categoria=2&id_descrizione=44&prodotto=52&id_descrizione_prod=38 - http://www.bcspeakers.com/index.php?sez=1&categoria=2&am p;id_descrizione=44&prodotto=52&id_descrizione_prod= 38

Does anyone know if any of these drivers would would work well in the xTro? The reason I'm looking at these drivers in because of there greater power handling. Basically I want to try reduce power compression and get as much SPL out of an xTro as posible.

Thanks

Mark

-------------
Free to do what i WANT

Replies:

Posted By: Mircea Bartic
Date Posted: 26 April 2006 at 5:58pm

I think the parameters that I have posted are for the P-audio WN-15S

not sure because the server that is hosting the pic is down so I can;t see it

to find suitability with your drivers, just insert the parameters into hornresp using the horn parameters tha I have provided

-------------
general manager & head designer at nexus-acoustics research
http://www.facebook.com/nexus.acoustics.research" rel="nofollow - http://www.facebook.com/nexus.acoustics.research

Ex Nexus_3

Posted By: PolymorphicMark
Date Posted: 27 April 2006 at 3:54am

Thanks Nexus_3. That cleared that one up. Very light cone used on the P-Audio WN-15S

-------------
Free to do what i WANT