Vision Acoustics line array
Printed From: Speakerplans.com
Category: General
Forum Name: Show Off Your Sound System
Forum Description: Show of your gear. Post pictures of your Sound System here...
URL: https://forum.speakerplans.com/forum_posts.asp?TID=55472
Printed Date: 26 March 2026 at 11:31pm
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com
Topic: Vision Acoustics line array
Posted By: MusicXtra
Subject: Vision Acoustics line array
Date Posted: 05 August 2011 at 10:15pm
Here a few pics of the new Vision Acoustics line-array.    |
Replies:
Posted By: Nachural
Date Posted: 05 August 2011 at 10:18pm
|
Looks good. Tell us more! ------------- it's all just cardboard and magnets really |
Posted By: MusicXtra
Date Posted: 05 August 2011 at 10:47pm
What do you want me to tell? |
Nachural wrote:Posted By: Nachural
Date Posted: 05 August 2011 at 11:06pm
|
Just a little about it's specifications and ratings. ------------- it's all just cardboard and magnets really |
Posted By: MusicXtra
Date Posted: 05 August 2011 at 11:18pm
It's a line-source array with 2 10" low mid drivers and a 2"/1" coaxial driver mounted on a three dimensional wave guide for the high mid and high frequenties. The horizontal coverage is 120° and the vertical coverage depends off the number of cabinets and the angle. The maximum SPL of an array of 6 cabinets is 145 dB. The phase response is close to perfection and the sound is really good with lots of dynamic and a very good low frequentie response down to 50 Hz (without subs  ). |
Posted By: Gigaset System
Date Posted: 05 August 2011 at 11:44pm
| Any reason the bottom cabinet is pointing at the floor ? Surely infill's would have been better ? |
Posted By: MusicXtra
Date Posted: 06 August 2011 at 12:05am
All cabinets are pointing on the floor  , in this configuration infills are not necessary, infills are a good solution for the coverage but they also introduce lots of problems. Here a pic off the same location a few weeks earlier with 6 cabinets per side.  |
Posted By: MusicXtra
Date Posted: 08 August 2011 at 6:26pm
| http://timobeckmangeluid.wordpress.com/" rel="nofollow - Here some measurement results from SIM 3. |
Posted By: Timo Beckman
Date Posted: 09 August 2011 at 9:09am
 . In this venue there was no need for infills .
(by the way i'm the guy that did the sim-ming on this set-up)
|
Posted By: rich_gale
Date Posted: 09 August 2011 at 9:15am
|
very attractive and tactful design. love the wrap around grille. really tidy. ------------- REFLEX ALL THE WAY.... (however, im playing with horns again...) That ok Mister Valiant? :) |
Posted By: MusicXtra
Date Posted: 11 August 2011 at 10:11am
|
Posted By: Enigmatic_Lemur
Date Posted: 11 August 2011 at 1:29pm
|
Not that I know much (or anything really) about Line Arrays... But a solution to a problem is never a problem. It's a logical absurdity.
|
Posted By: Grubbah
Date Posted: 13 August 2011 at 11:55am
Tidy, i love the grills, simple and by the sounds of it effective . What is the price tag on a set up of six per side minus the subs?
|
Posted By: Timo Beckman
Date Posted: 16 August 2011 at 10:23am
|
This is the link with the SIM3 data on the vision acoustics set . The previous link posted here goes to the top of my blog wich already has a new post right now .
http://timobeckmangeluid.wordpress.com/2011/07/21/real-live-allignment/ - http://timobeckmangeluid.wordpress.com/2011/07/21/real-live-allignment/
|
Posted By: Strange Daze
Date Posted: 16 August 2011 at 10:34am
|
No it isn’t. This doesn’t apply here, but whilst you feel the need to pick holes, I feel the need to correct your statement. What about Bose? One could say, “why don’t you just design a box that sounds nice, naturally, rather than design a box, that needs a shite load of EQ to make it sound, ‘okay’?”
The solution, is the problem in this case also.
As you were ;-) |
Posted By: Spartan Audio
Date Posted: 16 August 2011 at 10:54am
|
Looks like axsys.
------------- http://www.spartanaudio.co.uk |
Posted By: kevinmcdonough
Date Posted: 16 August 2011 at 11:38am
|
hey i thought i had posted this before but was on the road and must have had a connection blip. Can I ask what the grill holes on the side are? Is it simply the ports or is it some sort of side firing, rear rejection thing? k |
Posted By: Tony Wilkes
Date Posted: 16 August 2011 at 3:27pm
|
Pound to a pinch of cacky that they are ports
------------- www.forteaudio.eu - BMS - db-Mark Processors - Lexon (SAE) |
Posted By: MusicXtra
Date Posted: 16 August 2011 at 6:08pm
These are the ports. |
Posted By: kevinmcdonough
Date Posted: 16 August 2011 at 6:25pm
|
haha yeah thought as much, but thought i'd check anyway :-P k |