xtro in hornresp
Printed From: Speakerplans.com
Category: Plans
Forum Name: Punisher and X-tro
Forum Description: Discussion / Questions about the Punisher and X-tro
URL: https://forum.speakerplans.com/forum_posts.asp?TID=55506
Printed Date: 26 March 2026 at 10:55pm
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com
Topic: xtro in hornresp
Posted By: antimony
Subject: xtro in hornresp
Date Posted: 07 August 2011 at 4:43am
|
Im just trying to model the xtro mid in horn resp, I couldn't find CMS for the 8PE21 so let horn resp calculate it for me, but im not sure that looks right does it?  |
Replies:
Posted By: Teunos
Date Posted: 07 August 2011 at 9:54pm
if you're going for a one section wooden horn then yes, otherwise the con would be wrong. but per plan i think you are rather close ------------- Best regards, Teun. |
Posted By: loophole
Date Posted: 18 August 2011 at 11:32am
|
At a glance 188 um/N sounds very sensible to me and approx matches the 13L Vas for an 8" If you prefer just think that 1/(188e-6m/N)/(500mm)/(10N/kg)=1.06 tells you you'd have to put a kg on the cone to move it 2mm, which is about right. |